DSC ESCORT558O Manual de instrucciones descargar pdf (Pagina 16)

13

From the Home Automation menu, select Global Item Control by pressing [3]. The system will

prompt you with the following:

“To turn Global Items ON, press [1].“To turn Global Items ON, press [1].

“To turn Global Items ON, press [1].

To turn Global Items OFF, press [2].To turn Global Items OFF, press [2].

To turn Global Items OFF, press [2].

To exit, press [#].”To exit, press [#].”

To exit, press [#].”

6.5 Output Control Feature

The Output Control feature allows you to activate a programmable output on the main alarm

control panel. This output can be used to temporarily open magnetically locked doors, or

perform any function that requires a pulse of voltage to operate it. Up to 4 different output

controls are available. Each can be programmed by your installer to activate a variety of

devices. Ask your installer for more details.

You may activate an Output Control while the system is armed or disarmed. Access the

security system (Section 2—Accessing Your Security System) and select a partition (Section

2.5—If You Have a Two-Partition System).

Press [✱]. You will hear the prompt:

“ For {Output Control}, press [7].”“ For {Output Control}, press [7].”

“ For {Output Control}, press [7].”

Press [7]. You will hear the prompts:

“For {Output Control 1}, press [1].”“For {Output Control 1}, press [1].”

“For {Output Control 1}, press [1].”

“For {Output Control 2}, press [2].”“For {Output Control 2}, press [2].”

“For {Output Control 2}, press [2].”

“For {Output Control 3}, press [3]."“For {Output Control 3}, press [3]."

“For {Output Control 3}, press [3]."

“For {Output Control 4}, press [4].”“For {Output Control 4}, press [4].”

“For {Output Control 4}, press [4].”

Press the key corresponding to the Output Control you want to activate.

If an access code is required, you will hear the prompt:

“Enter your access code”“Enter your access code”

“Enter your access code”

Enter your [access code]. The system will announce:

“{Output Control} in progress”“{Output Control} in progress”

“{Output Control} in progress”

The system will return to the main menu.

To exit, press [#].”To exit, press [#].”

To exit, press [#].”

6.6 Video Camera Triggering

The Escort5580 can be used to remotely control the triggering of video cameras. This can

only be done with security systems that have cameras connected to them via a PC5108L

module (ask your installer for more details). The Video Camera Triggering feature will cause

cameras to take pictures according to a sequence (or script) that has been programmed in

the PC5108L module.

To access this feature, access your system remotely (Section 2.2—Remote Access).

Press [✱], then [8]. Your system will prompt:

"Enter your access code.""Enter your access code."

"Enter your access code."

Enter your [access code]. The system will announce:

"Goodbye.""Goodbye."

"Goodbye."

The system will then hang up so that the PC5108L can run the programmed script.

H O M E A U T O M A T I O N

DSC ESCORT558O Manual de instrucciones Pagina 16

Comentarios a estos manuales

DSC ESCORT558O Manual de instrucciones Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC ESCORT558O