DSC PC1150 Manual de instalación descargar pdf (Pagina 15)

Binary Data Display

Zone lights 1 through 4 are used to display the value of each digit of data in a binary format as shown here:

Value

Zone 1

Zone 2

Zone 3

Zone 4

HEX data entry

Refer to HEX Data Programming

Zone Light ON

0 Zone Light OFF

HEX Data Programming

Some programming sections require that data be entered in a HEX (hexadecimal, or base 16) format. HEX

numbering uses the digits 0 through 9 and the letters A through F.

The

letters

through Fare represented by the number keys 1 through 6. To enter data in HEX format, first press

the

[*]

Key. The “Ready” light will FLASH. Enter the HEX value, then press the

[*I

Key again to return to the

normal data entry mode; the “Ready” light will stop flashing.

To enter HEX numbers:

Enter

[*J[l][*]

Enter

[*][2][*]

Enter

[*][3][*]

Enter

[*][4][*]

Enter

[*][5][*]

Enter

[*][6][*]

Enter

[*]

before

and aftereach digit. The last digit in each section does not require the final asterisk

(*)

be entered.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Sin comentarios

DSC PC1150 Manual de instalación Pagina 15