DSC PC1575 Manual de usuario descargar pdf (Pagina 8)

down

look

MLRV-A

Automated

Video Receiver Module

The Automated MLRV-A Video Receiver Module provides for the receiving of video images over

the regular telephone lines following the Event information.

One MLRV-A module connects to and works with one Digital Receiver line (DRL2A).

The MLRV-A can only connect to and work with the Sur-Gard MLR2 Multi Line Receiver.

The MLR2 Receiver is a two line receiver expandable to 14 lines, each receiver line, if required

can have the MLRV-A module, if expanded to a maximum number additional power must be

taken into consideration.

The MLRV-A can be housed in one of two expansion cages available, the MLRXV or MLR2XV,

both are 19” rack mount and should be located in the same cabinet as the MLR2 receiver. A

four wire connection must be made between the MLRXV or MLR2XV backplane board and the

back plane board of the DRL2A.

The Automated MLRV-A provides for two outputs, a Coaxial video output off a BNC post and PC

output by a 25 pin video bus and 9 pin data bus. The MLRV-A can be set for video out, PC out

or both.

Video images transmitted to the video monitor and PC also include the Account code, time and

date and the camera number with amount of images to be sent.

Two set’s of dip switches in the MLRV-A provide for several options when viewing the video on a

Video monitor, they allow for large or small account code, flashing information and how long it

will stay on the screen. The options are only applicable to the video monitor, on the PC the

Downlook software will display all images with extended account information.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

DSC PC1575 Manual de usuario Pagina 8