DSC PC560 Manual de instrucciones descargar pdf (Pagina 8)

6 7

ARMING OPTIONS

At-Home Arming

At-Home Arming automatically bypasses the zones on your system programmed as Stay-Away with

Delay, and also removes the entry delay from the entry-exit zones. This feature allows you to arm the

system and remain on the premises. In addition, if any of the entry-exit doors are opened, an alarm will

sound instantly.

To use At-Home Arming, enter [

∗

][9][Access Code] on the keypad. The Armed light will flash to remind

you that there is no entry delay on the entry-exit doors.

Stay-Away Arming

Stay-Away arming automatically bypasses the zones on your system programmed as Stay Away with

Delay, and applies the entry delay to the entry-exit zones. For example, you could use this feature to arm

the system and remain on the premises. Another household member would still be able to enter the

premises through the entry-exit door without causing an alarm. When the entry-exit door is opened, an

access code would have to be entered to disarm the system.

To arm the system with Stay-Away Arming, enter an access code and do not open the entry-exit door.

When the exit delay expires, the system will be armed with the Stay-Away with Delay zones automatically

bypassed. Your installer will inform you of which zones on your system have been defined as Stay-Away

with Delay zones.

Quick-Arm

The Quick-Arm feature allows you to enter [

∗

][0] to arm the system. This command is designed to allow

someone to arm the system without that person having to be provided with an access code. When [

∗

][0] is

entered, the exit delay will begin and the user may leave the premises through the entry-exit door. At the

end of the exit delay, the Armed light will come ON and the system will be fully armed.

PC500RK KEYPAD

Important:

Follow the instructions in the manual to test your system weekly. Follow the

guidelines for correcting system trouble conditions; have any system trouble

conditions you cannot correct yourself attended to by your installer.

Zone Lights 1 to 4 indicate zone activity. When a

zone is secure, its zone light will be OFF; when a

zone is open, its zone light will be ON. If a zone

goes into alarm when the system is armed, the

alarm will be indicated on the zone lights until the

system is disarmed.

Test system regularly.

Refer to Instruction Manual

for testing instructions.

To View Bypassed Zones:

Enter [

][1][Access Code]. Press [#]

to return to "Ready".

To turn the Door Chime On and Off:

Enter [

][6].

To program Access Codes:

Enter [

][5][Master Code] and [number of

code to program] and [new 4-digit code].

Press [#] to return to "Ready".

To View Alarm Memory:

Enter [

][3]. Press [#] to return to "Ready".

To Perform a Bell Test:

Enter [

][4].

PC500RK

F PA

NOT

USE

NOT

USE

NOT

USE

Zone 1

Zone 2

Zone 3

Zone 4

Armed

System

Ready

F A P

The “Ready” light will come ON when the

system is ready to be armed. When the “Ready”

light is OFF, there is an open zone on the

system. The zone must be closed or bypassed

before the system can be armed. If the “Ready”

light is OFF and none of the zone lights are ON,

the Tamper zone has been

activated.

The “Armed” light will come

ON to indicate that the

system is armed. The

“Armed” light will flash to

indicate that the system is

armed and that there is no

entry delay on any of the

zones.

The “System” light will come

ON to indicate:

•that zones are bypassed

• there is a trouble condition

on the system

•there are alarms in

memory.

Use the [

∗

][1][Access Code]

command to display the

zones that have been

bypassed; be sure that zones

are intentionally bypassed

before arming the system.

Use the [

∗

][2] command to

display any trouble

conditions; be sure to have

trouble conditions corrected

by your installer as soon as

possible.

Use the [

∗

][3] command to view the alarms in memory.

Press [#]:

• when an error is made in entering an access code, then enter the code

again

• to return to “Ready” after using [

∗

] commands

[F] Key: Press and hold this key for 2 seconds to sound an [F] Key alarm

[A] Key: Press and hold this key for 2 seconds to generate an [A] Key alarm

[P] Key: Press and hold this key for 2 seconds to generate a [P] Key alarm.

These keys must be enabled by your installer before they

become functional. Your installer will tell you how these

keys operate on your system.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

DSC PC560 Manual de instrucciones Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC560