DSC PTK5507 Manual de usuario descargar pdf (Pagina 20)

Clean Mode – allows the user to touch (i.e., clean) the screen without enabling or disabling any func-

tions. The screen will remain in this mode for 30 seconds (See Figure 14 on page 16), then return to the

Keypad Configuration screen ( See Figure 13 on page 15).

Figure 14 - Clean Mode

Home Page – can be configured in one of two different views, Classic (square buttons) and Contempo-

rary (rondel).

Chime Enabled/Disabled

Door chime - To turn the door chime function On/Off, tap the Chime icon. There are 3 beeps to indicate

that the chime is ON, 1 long beep to indicate the chime is OFF.

Arming

Stay Arm – arms the system in Stay mode.

Away Arm – arms the system in Away mode.

Night Arm – To fully arm the system when it has been armed in Stay Mode, press Night Arm button.

All interior zones will now be armed except for devices programmed as Night Zones. Night zones are

only armed in Away mode. This permits limited movement within the premises when the system is fully

armed. Ensure that your installer has provided you with a list identifying zones programmed as night

zones. When the interior zones have been activated (i.e., Night Arm), you must enter your access code

to disarm the system to gain access to interior areas that have not been programmed as night zones.

Quick Exit – see Quick Exit on page 6.

Global Away Arm – arms all partitions to which the User Code is assigned, in Away mode.

Global Stay Arm – arms all partitions to which the User Code is assigned, in Stay mode.

No Entry Arm – arms the system with no entry.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

DSC PTK5507 Manual de usuario Pagina 20