DSC PC1575 Manual de instalación descargar pdf (Pagina 32)

FCC COMPLIANCE STATEMENT

CAUTION:

Changes or modifications not expressly

approved by Digital Security Controls Ltd. could void

your authority to use this equipment.

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or

more of the following measures:

Re-orient the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television

technician for help.

The user may find the following booklet prepared by the

FCC useful: “How to Identify and Resolve Radio/Television

Interference Problems”. This booklet is available from the

U.S. Government Printing Office, Washington D.C. 20402,

Stock # 004-000-00345-4.

IMPORTANT INFORMATION

This equipment complies with Part 68 of the FCC

Rules. On the side of this equipment is a label that

contains, among other information, the FCC

registration number of this equipment.

NOTIFICATION TO TELEPHONE COMPANY

The

customer shall notify the telephone company of the

particular line to which the connection will be made,

and provide the FCC registration number and the

ringer equivalence of the protective circuit.

FCC Registration Number: F53CAN-74349-KX-N

Facility Interface Code: 02LS2

Ringer Equivalence Number: 0.0B

Service Order Code: 9.0F

USOC Jack: RJ31X

TELEPHONE CONNECTION REQUIREMENTS

Except

for the telephone company provided ringers, all

connections to the telephone network shall be made

through standard plugs and telephone company provided

jacks, or equivalent, in such a manner as to allow for easy,

immediate disconnection of the terminal equipment.

Standard jacks shall be so arranged that, if the plug

connected thereto is withdrawn, no interference to the

operation of the equipment at the customer’s premises

which remains connected to the telephone network

shall occur by reason of such withdrawal.

INCIDENCE OF HARM

Should terminal equipment or

protective circuitry cause harm to the telephone network,

the telephone company shall, where practicable, notify

the customer that temporary disconnection of service

may be required; however, where prior notice is not

practicable, the telephone company may temporarily

discontinue service if such action is deemed reasonable

in the circumstances. In the case of such temporary

discontinuance, the telephone company shall promptly

notify the customer and will be given the opportunity to

correct the situation.

ADDITIONAL TELEPHONE COMPANY

INFORMATION

The security control panel must be

properly connected to the telephone line with a USOC

RJ-31X telephone jack.

The FCC prohibits customer-provided terminal

equipment be connected to party lines or to be used in

conjunction with coin telephone service. Interconnect

rules may vary from state to state.

CHANGES IN TELEPHONE COMPANY EQUIPMENT

OR FACILITIES

The telephone company may make

changes in its communications facilities, equipment,

operations or procedures, where such actions are

reasonably required and proper in its business. Should

any such changes render the customer’s terminal

equipment incompatible with the telephone company

facilities the customer shall be given adequate notice to

the effect modifications to maintain uninterrupted

service.

RINGER EQUIVALENCE NUMBER (REN)

The REN is

useful to determine the quantity of devices that you may

connect to your telephone line and still have all of those

devices ring when your telephone number is called. In

most, but not all areas, the sum of the RENs of all

devices connected to one line should not exceed five

(5.0). To be certain of the number of devices that you

may connect to your line, you may want to contact your

local telephone company.

EQUIPMENT MAINTENANCE FACILITY

If you

experience trouble with this telephone equipment,

please contact the facility indicated below for information

on obtaining service or repairs. The telephone company

may ask that you disconnect this equipment from the

network until the problem has been corrected or until

you are sure that the equipment is not malfunctioning.

Digital Security Controls Ltd. 160 Washburn St.,

Lockport, NY 14094

1 2 ... 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios

DSC PC1575 Manual de instalación Pagina 32

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC1575