DSC PC1575 Manual de instalación Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
3
INTRODUCING THE
IMPORTANT NOTE
A security system cannot prevent emergencies. It is only intended to alert you and, if included, a monitoring
station, of an emergency situation. Security systems are generally very reliable but they may not work under
all conditions and they are not a substitute for prudent security practices or life and property insurance.
Your security system should be installed and serviced by qualified security professionals who should
instruct you on the level of protection that has been provided and on system operations.
The LINKS1000 Cellular Alarm Transmitter enhances the protection provided by a security system by
providing a reliable backup to the control panel’s normal telephone communications with the monitoring
station. The LINKS1000 works with the DSC and Sur-Gard Security Control Panels described in the
Specifications below.
If the control panel is unable to complete an alarm transmission through the normal telephone line, due to any
line problems, the LINKS1000 will be activated and will transmit the alarm communication over the cellular
network. The LINKS1000 works automatically.
The LINKS1000 has been designed for simple and straightforward installation. Wiring connections are made
directly between the LINKS unit and the security control panel. The DSC and Sur-Gard Security Control Panels
require only minor changes in their Programming Sections
Specifications
Compatible control panels
DSC PC1500/PC1550 software version 4.0 or later
DSC PC1575 software version 1.0 or later
DSC PC2525 software version 1.0 or later
DSC PC2550 software version 1.2 or later
DSC PC3000 software version 7.6 or later
DSC PC4010 software version 1.0 or later
DSC PC4020 software version 1.0 or later
DSC PC4020KT software version 1.0 or later
DSC PC5010 software version 1.0 or later
Sur-Gard DC1664LC software version 3.6 or later (requires MEX2 Module)
Sur-Gard P16LC and P1664LC software versions 2.0 or later
Communication Method
Amps cellular telephone network
RF Power Output
3.0 Watts maximum
Antenna
3 - 5 dB gain, TNC connector
Battery
12 volt 7 Ah minimum rechargeable gel-cell type battery
Transformer
16.5 VAC, 40 VA
Dimensions
11" × 11.8" × 3.3" (279 mm × 300 mm × 84 mm)
Weight
6.5 lbs. (3 kg)
Vista de pagina 3
1 2 3 4 5 6 7 8 9 ... 31 32

Comentarios a estos manuales

Sin comentarios