832
832
832
PC5108L Downlook Interface Module
***
for PC5015 only
***
• provides an interface between the PC5015 alarm control panel
and the Downlook DLM-4 still frame video transmission module
• communicates alarm followed by video over a single telephone
line in one transmission to a Sur-Gard MLR2 digital receiver
• 8 inputs for video cameras, VCRs, or video switchers
• 8 general purpose burglary or fire alarm zone inputs
• any alarm zone (up to 32) or group of zones can be programmed
to initiate video capture of 4 frames from any 4 sources - in any
sequence
• programmable on-site sequential video switcher mode
- view and capture images on a monitor / VCR setup
- select cameras for viewing manually using an LED keypad or
program system to switch automatically between selected
cameras at programmed dwell times
• supervised by main panel
• programmable via downloading using modem or direct PC-Link
• connect up to 1000' (305m) from control panel via KEYBUS
• module current draw : 60mA @ 12VDC
DLC-1 Cabinet
DLM-4L
PC5108L
Power832
Alarm Panel
Telco
up to 8
video sources
PC5204 Power Supply/High Current
Output Module
• provides 1A @ 12.5VDC auxiliary power for additional modules
and devices
• includes 4 fully programmable high current outputs
- rated at 1A @ 12VDC, PTC protected
- will provide 3A short term if battery backup connected
- each output can sink up to 3A
• output #1 may also be used as a supervised bell output
- 700mA max
• each output programmable to activate for any of 24 options
• connect up to 1000' (305m) from control panel via KEYBUS
• fully supervised for : tamper, low battery, AC power loss, and
auxiliary power trouble
• maximum 1 module per system
• module current draw : 20mA @ 12VDC
• battery required : 4Ah minimum
• transformer required : 16.5VAC, 40VA
PC5208 Low Current Output Module
• module provides 8 low current transistor switch outputs
- each output can sink up to 50mA
- up to 250mA max at one time
• each output programmable to activate for any of 24 options
• connect up to 1000' (305m) from control panel via KEYBUS
• fully supervised for tamper
• maximum 1 module per system
• module current draw : 20mA @ 12VDC
832
Integrated
CCTV
832
PGM
Output Expansion
—— Note ——
Power832 Engineer’s Specifications are available on :
• separate copy
• DSC’s web site 'www.dscsec.com'
Digital Security Controls
1645 Flint Road, Downsview, ON, Canada M3J2J6
www.dscgrp.com
(PC5015 only)
Comentarios a estos manuales