DSC WTK5504 Manual de instalación descargar pdf (Pagina 9)

PC4400 Serial Interface Module

• True RS-232 technology

• Handshake software switches

• Protocol XON/XOFF or DTR

• 5 possible baud rates 300, 600, 1200, 2400 and 4800

• DVAC communications

• Four wire (QUAD) hook-up to Combus

• Nominal current draw of 35 mA

• Provides Tamper Reporting Codes

• Low Combus supervision to PC4020 Main Board

Note: 4800 Baud is only available on PC4400 software

version 2.00 and above.

PC4700 Fire Module

• One module per system

• 2 wire Class B/Style B smoke detector circuit (20

detectors maximum)

• 4 wire Class D/ Style D waterflow circuit (5 sensor

maximum [NFPA 3-8-6-3])

• 1 fully programmable supervised bell output.

(Controlled via the Main Bell Output)

• Dual supervised Telco lines - With the ability to switch

to the second line in the event of a line failure.

• Ground fault detection

• Nominal current draw of 35 mA

• Four wire quad connection to Combus

• Low Combus supervision to the Main Board

• Reporting codes for:

- Bell CCT Trouble

- Waterflow Alarm/Trouble

- 2 Wire smoke Alarm/Trouble

- TLM trouble/restoral for line 1 and line 2

- Ground Fault

LCD4500 Remote Keypad

• Up to 16 keypads on system

• Alphanumeric liquid crystal display

• Built-in piezoelectric buzzer

• Full annunciation of zones and system status

• Four wire (QUAD) hook-up to Combus

• Nominal current draw of 55 mA

• Provides Tamper Reporting Codes

• Low Combus supervision to PC4020 Main Board

• Dimensions 5.75" x 4.5" x 1" deep (144 x 114 x 25 mm)

Escort4580 (Voice Prompting Module)

• One module per system

• Full voice prompts for all major user accessible

sections

• Four wire quad connection to Combus

• Nominal current draw of 70 mA - 140 mA

• Automation Control capabilities - up to 32 Automation

Module per system

• Low Combus supervision to the main board

PC4108 Expansion Module

• Up to 128 zones total on system

• 8 zone expansion module

• Normally closed loops, EOL resistor, Double EOL

resistor support

• Four wire (QUAD) hook-up to Combus

• Nominal current draw of 25 mA

• Provides Tamper Reporting Codes

• Low Combus supervision to PC4020 Main Board

PC4116 Expansion Module

• Up to 128 zones in total on system

• Normally closed loops, EOL resistor, Double EOL

resistor support

• 16 zone expansion module

• Four wire (QUAD) hook-up to Combus

• Nominal current draw of 30 mA

• Provides Tamper Reporting Codes

• Low Combus supervision to PC4020 Main Board

PC4164 Expansion Module

• Up to 64 zones in total on the system

• One module per system

• 64 zone wireless expansion module

• Support for Universal transmitters and PIRs

• Normally closed and zone module tamper support

• 4 wire quad hookup to the PC4164

• Nominal current draw of 110 mA

• Provides zone alarm/zone low battery/zone tamper

reporting codes

• Low Combus supervision to the PC4020

PC4204 High Current Output Module

• 4 output high current module

• Up to 16 modules on system

• Minimum 40 VA 16-18 volt transformer required

• Minimum 4 Amp-Hour, 12 volt battery required

• Each output programmable for 1 of 35 options

• Four wire (QUAD) hook-up to Combus

• Nominal current draw of 25 mA

• Provides Tamper and Trouble Reporting Codes

• Low Combus supervision to PC4020 Main Board

• 1.5 Amp output

PC4216 Low Current Output Module

• 16 output low current module

• Up to 9 modules on system

• All module programmable for all 16 outputs, 1 of 35

options for each

• Programmable as alarm annunciators or zone followers

• Four wire (QUAD) hook-up to Combus

• Nominal current draw of 15 mA

• Provides Tamper Reporting Codes

• Low Combus supervision to PC4020 Main Board

MODULE

SPECIFICATIONS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comentarios a estos manuales

Sin comentarios

DSC WTK5504 Manual de instalación Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC WTK5504