DSC PC5020 Manual de instalación descargar pdf (Pagina 38)

Appendix A: Reporting Codes

The following tables contain Contact ID and Automatic SIA for-

mat reporting codes. For more information on reporting code

formats and notes about individual reporting codes, see sections

section 5.8

“Communicator - Reporting Codes”

on page 25 and

section 5.7

“Communicator - Reporting Formats”

on page 23.

Contact ID

The first digit (in parentheses) will automatically be sent by the

control. The second two digits are programmed to indicate spe-

cific information about the signal.

For example, if zone 1 is an entry/exit point, you could program

the event code as [34]. The central station would receive the fol-

lowing:

*BURG - ENTRY/EXIT - 1

where the “1” indicates which zone went into alarm.

SIA Format - Level 2 (Hardcoded)

The SIA communication format used in this product follows the

level 2 specifications of the SIA Digital Communication Standard

- October 1997. This format will send the Account Code along

with its data transmission. The transmission would look similar to

the following at the receiver:

N Ri01 BA 01

N = New Event

Ri01 = Partition /Area Identifier

BA = Burglary Alarm

01 = Zone 1

NOTE:

A system event will use the Area Identifier Ri00.

Section # Reporting Code Code Sent When...

Dialer

Direction*

Automatic

Contact ID

Codes

SIA Auto Rep

Codes**

[320]-[323] Zone Alarms zone goes into alarm A/R (1) 3A See Table 3

[324]-[327] Zone Restorals alarm condition has been restored A/R (1) 3A

[328] Duress Alarm duress code entered at keypad A/R (1) 21 HA-00

[328] Opening After Alarm system disarmed with alarm in memory A/R (4) A6 OR-00

[328] Recent Closing alarm occurs within two minutes of system arming A/R (4) 59 CR-00

[328] Zone Expander Supervisory

Alarm/Rest.

panel loses/restores supervisory transmission over the Key-

bus from zone expansion modules, or keypads with zone

inputs

A/R (1) 43 UA-00/UH-00

[328] Cross Zone (Police Code)

Alarm

two zones on the same partition go into alarm during any

given armed-to-armed period (incl. 24Hr zones)

A/R (1) 4A BV-00

[329] [F] Key Alarm/Rest. Keypad fire alarm (alarm and restore rep. codes sent

together)

A/R (1) 15 FA-00/FH-00

[329] [A] Key Alarm/Rest. Keypad auxiliary alarm (alarm and restore rep. codes sent

together)

A/R (1) AA MA-00/MH-00

[329] [P] Key Alarm/Rest. Keypad panic alarm (alarm and restore rep. codes sent

together)

A/R (1) 2A PA-00/PH-00

[330]-[337] Zone Tamper/Restoral zone is tampered / tamper condition restored T/R (1) 44 TA-ZZ/TR-ZZ

[338] General System Tamper/

Rest.

enrolled module with tamper inputs has a tamper alarm/all

module tampers restored

T/R (1) 45 TA-00/TR-00

[338] Keypad Lockout maximum number of incorrect access codes has been

entered at a keypad

T/R (4) 21 JA-00

[339-341] Closings system armed (user 01-34, 40-42 indicated) O/C (4) A2 CL-UU

[341] Partial Closing one or more zones bypassed when system armed O/C (4) 7A CG-ZZ

[341] Special Closing Closing (arming) using one of the following methods: quick

arm, auto arm, keyswitch, function key, maintenance code,

DLS software, wireless key

O/C (4) AA CL-00

[341] Late to Close whenever the auto-arm prealert sounds (if the Late to Close

option is enabled)

O/C (4) A4 CI-00

[342-344] Openings system disarmed (user 01-34, 40-42 indicated) O/C (4) A2 OP-UU

[344] Auto Arm Cancellation auto arm cancelled O/C (4) A5 CE-00

[344] Special Opening Opening (disarming) using one of the following methods:

keyswitch, maintenance code, DLS software, wireless key

O/C (4) AA OP-00

[345]-[346] Battery Trouble/Rest. PC5020 battery is low/battery restored MA/R (3) A2 YT-00/YR-00

* A/R = alarms/restorals; T/R = tampers/restorals; O/C = openings/closings; MA/R = miscellaneous alarms/restorals; T = test transmissions

** UU = user number (user01-42); ZZ = zone number (01-64)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43

Comentarios a estos manuales

Sin comentarios

DSC PC5020 Manual de instalación Pagina 38

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC5020