DSC PC6010 Manual de usuario descargar pdf (Pagina 17)

If you press the [#] key, only the data that you entered will be

changed. All remaining programming data will be left

unchanged. For example, when programming telephone

numbers you do not need to program all 32 digits. When you

have finished entering the telephone number, press [#] - the

telephone number will be saved and the system will exit from the

programming section. .

5.4 Programming Hexadecimal Data

Hexadecimal or “Hex” digits are often required for

programming items, such as telephone numbers and reporting

codes. To insert a Hex digit into a programming section:

1. Press [*] to enter the Hex menu.

2. Use the arrow keys to scroll through the Hex digits (A

through F).

3. When the desired Hex digit is displayed, press [*] again.

You can also enter Hex digits by pressing [*], followed by the

number which corresponds to the Hex letter (A = 1, B = 2, C = 3,

D = 5, E = 5, F = 6). Once the digit is entered, the control panel

will automatically return to the decimal programming mode.

For example, to enter “ABCD”, you would press: [*], [1], [*], [2],

[*], [3], [*], [4]

5.5 Programming Toggle Options

Many programming items are toggle options that are either

enabled or disabled. Use the arrow keys (< >) to scroll through

the toggle options. Press [*] to switch back and forth between

[Y]es (enabled) and [N]o (disabled). Once all the toggle options

have been programmed, press [#] to save your changes, and

return to the previous menu.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Sin comentarios

DSC PC6010 Manual de usuario Pagina 17