DSC POWER 864 - REV2 Especificaciones descargar pdf (Pagina 128)

PIC24F16KA102 FAMILY

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0

— — — — — — — —

bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — SMBUSDEL

(3)

OC1TRIS

RTSECSEL1

(1,4)

RTSECSEL0

(1,4)

—

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-5 Unimplemented: Read as ‘0’

bit 3 OC1TRIS: OC1 Output Tri-State Select bit

1 = OC1 output will not be active on the pin; OCPWM1 can still be used for internal triggers

0 = OC1 output will be active on the pin based on the OCPWM1 module settings

bit 0 Unimplemented: Read as ‘0’

Note 1: To enable the actual RTCC output, the RTCOE (RCFGCAL) bit needs to be set.

2: To enable the actual OC1 output, the OCPWM1 module has to be enabled.

3: Bit 4 is described in Section 17.0 “Inter-Integrated Circuit (I

C™)”.

4: Bits 2 and 1 are described in Section 19.0 Real-Time Clock and Calendar (RTCC).

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 253 254

Sin comentarios

DSC POWER 864 - REV2 Especificaciones Pagina 128