DSC Power8 PC5OO5 Manual de instalación descargar pdf (Pagina 2)

FCC Compliance Statement:

CAUTION: Changes or modifications not expressly approved by Digital

Security Controls Ltd. could void your authority to use this equipment.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Re-orient the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: “How to

Identify and Resolve Radio/Television Interference Problems”. This booklet is

available from the U.S. Government Printing Office, Washington D.C. 20402,

Stock # 004-000-00345-4.

IMPORTANT INFORMATION

This equipment complies with Part 68 of the FCC Rules. On the side of

this equipment is a label that contains, among other information, the FCC

registration number of this equipment.

Notification to Telephone Company The customer shall notify the tele-

phone company of the particular line to which the connection will be

made, and provide the FCC registration number and the ringer equiva-

lence of the protective circuit.

FCC Registration Number: F53CAN-34330-AL-E

Ringer Equivalence Number: 0.1B

USOC Jack: RJ-31X

Telephone Connection Requirements Except for the telephone company

provided ringers, all connections to the telephone network shall be made

through standard plugs and telephone company provided jacks, or equivalent,

in such a manner as to allow for easy, immediate disconnection of the terminal

equipment. Standard jacks shall be so arranged that, if the plug connected

thereto is withdrawn, no interference to the operation of the equipment at the

customer’s premises which remains connected to the telephone network shall

occur by reason of such withdrawal.

Incidence of Harm Should terminal equipment or protective circuitry cause

harm to the telephone network, the telephone company shall, where practica-

ble, notify the customer that temporary disconnection of service may be

required; however, where prior notice is not practicable, the telephone com-

pany may temporarily discontinue service if such action is deemed reasonable

in the circumstances. In the case of such temporary discontinuance, the tele-

phone company shall promptly notify the customer and will be given the oppor-

tunity to correct the situation.

Additional Telephone Company Information The security control panel must

be properly connected to the telephone line with a USOC RJ-31X telephone

jack.

The FCC prohibits customer-provided terminal equipment be connected to

party lines or to be used in conjunction with coin telephone service. Intercon-

nect rules may vary from state to state.

Changes in Telephone Company Equipment or Facilities The telephone

company may make changes in its communications facilities, equipment,

operations or procedures, where such actions are reasonably required and

proper in its business. Should any such changes render the customer’s termi-

nal equipment incompatible with the telephone company facilities the cus-

tomer shall be given adequate notice to the effect modifications to maintain

uninterrupted service.

Ringer Equivalence Number (REN) The REN is useful to determine the quan-

tity of devices that you may connect to your telephone line and still have all of

those devices ring when your telephone number is called. In most, but not all

areas, the sum of the RENs of all devices connected to one line should not

exceed five (5.0). To be certain of the number of devices that you may connect

to your line, you may want to contact your local telephone company.

Equipment Maintenance Facility If you experience trouble with this telephone

equipment, please contact the facility indicated below for information on

obtaining service or repairs. The telephone company may ask that you discon-

nect this equipment from the network until the problem has been corrected or

until you are sure that the equipment is not malfunctioning.

Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094

1 2 3 4 5 6 7 ... 39 40

Comentarios a estos manuales

Sin comentarios

DSC Power8 PC5OO5 Manual de instalación Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC Power8 PC5OO5