DSC Power832 PC5O15 Manual de instalación descargar pdf (Pagina 11)

G E T T I N G S T A R T E D

BELL: 700 mA. Continuous Rating.

3.0 A. Short Term. Available only with stand-by battery connected.

• PC5200/5204 VAUX:1.0 A. Continuous Rating. Subtract for each device connected.

3.0 A. Short Term. Available only with stand-by battery connected.

• PC5208 VAUX: 250 mA. Subtract for each device connected. Subtract the total load on this terminal

from the PC5015 VAUX/Keybus output.

• PC5108 VAUX: 100 mA. Subtract for each device connected. Subtract the total load on this terminal

from the PC5015 VAUX/Keybus output.

PC5015 Device Ratings (@ 12 V

DC)

• LCD5500 Keypad: 50 mA • PC5208 Output Module: 50 mA

• PC5508Z Keypad: 80 mA • PC5132 Wireless Module: 125 mA

• PC5516Z Keypad: 90 mA • Escort5580 Module: 150 mA

• PC5532Z Keypad: 120 mA • PC5928 Audio Interface Module: 65 mA

• LCD5500Z Keypad: 85 mA • PC5921 Intercom Audio Station: 20 mA

• PC5108 Zone Module: 35 mA • PC5921 EXT Door Box Audio Station: 20 mA

• PC5204 Output Module: 20 mA • PC5921 EXT/R Door Box Audio Station: 35 mA

• PC5108L Downlook Interface: 60 mA • PC5400 Printer Module: 65 mA

• PC5936 Module:100mA • DLM-4L v1.0L: 180 mA

• PC5700 Fire Module: 150 mA • PC5502Z2 Keypad: 25mA

• LCD5501Z Keypad: 90mA

Other Devices

Read the manufacturer’s literature carefully to determine the maximum current requirement (during activation or

alarm) and use this value for loading calculations. Do not allow connected devices to exceed the system

capabilities during any possible operational mode.

2.6 Assigning Zones to Zone Expanders

The main panel contains zones 1 to 8. Additional zone expanders may be added to increase the number of

zones on the system. Each zone expander consists of two groups of 4 zones and each group must be

configured to assign the specific zones to the expander. This is done by setting the jumpers located on the

expander to the proper settings.

BeforBefor

Befor

e a zone expander will work pre a zone expander will work pr

e a zone expander will work pr

operly the jumpers must be set so the panel can deteroperly the jumpers must be set so the panel can deter

operly the jumpers must be set so the panel can deter

mine themine the

mine the

corcor

cor

ect zone assignmentect zone assignment

ect zone assignment

The following are the jumper settings for different zone assignments:

Jumpers System Zones Assigned

J1/J4 J2/J5 J3/J6

ON ON ON Zones disabled

OFF ON ON Zones disabled

ON OFF ON Zones 09 - 12

OFF OFF ON Zones 13 - 16

ON ON OFF Zones 17 - 20

OFF ON OFF Zones 21 - 24

ON OFF OFF Zones 25 - 28

OFF OFF OFF Zones 29 - 32

J1, J2 and J3 set system zone assignments for expander zones 1-4

J4, J5 and J6 set system zone assignments for expander zones 5-8

The following are diagrams of the PC5108 and PC5700 zone expander modules and where the jumper switches

are located. Refer to the Installation Instructions of each module for more information.

TherTher

Ther

e are ar

e ar

e two sets of jumpers, one set for the first 4 zones of the expander and one set for the other 4 zonese two sets of jumpers, one set for the first 4 zones of the expander and one set for the other 4 zones

e two sets of jumpers, one set for the first 4 zones of the expander and one set for the other 4 zones

In these two diagrams the jumpers settings shown indicate the first group of four zones of the expander will be

zones 9 to 12 and the second group of 4 zones will be 13 to 16. A group of zones can be disabled if they are not

required for the installation.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Comentarios a estos manuales

Sin comentarios

DSC Power832 PC5O15 Manual de instalación Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC Power832 PC5O15