DSC Power832 Security System PC5016 Especificaciones descargar pdf (Pagina 17)

K E Y P A D C O M M A N D S

3.5 Function Keys

There are 5 function keys on the PC5016 keypads labelled Stay, Away, Chime, Reset and Exit. The operation of

these keys is described below. The function is activated by pressing and holding the key for 2 seconds.

“Stay” - Stay Arm

Arms the partition to which the keypad is assigned. All Stay/Away type zones will be automatically

bypassed. Delay type zones will provide entry and exit delay. The Quick Arm feature must be enabled for

this key to function.

“Away” - Away Arm

Arms the partition to which the keypad is assigned. All Stay/Away type zones will be active at the end of

the exit delay. Delay type zones will provide entry and exit delay. The Quick Arm feature must be enabled

for this key to function.

“Chime” - Doorchime On/Off

Pressing the key will toggle the Doorchime feature ON or OFF. One solid beep means the feature has

been disabled, three short beeps means it has been enabled.

“Reset” - Reset Smoke Detectors

Pressing this key will cause the panel to activate for 5 seconds any output programmed as Sensor Reset.

In addition 2-wire smoke detectors connected to PGM2 will also be reset

(See Section 3.4 “[ ]

Commands, [ ][7][2]”).

“Exit” - Activate Quick Exit

Pressing this key will cause the panel to activate the Quick Exit feature

(See Section 3.4 “[ ] Commands,

[ ][0]”).

3.5.1 Function Key Options

The following is a list of Function Key options available:

[00] - Null Key

The key is not used and will perform no function when pressed.

[01] - Select Partition 1

Provides an easy way to select Partition 1 operation from a Partition 2 keypad. This is the same as

pressing and holding the [#] key then pressing and holding the [1] key to select Partition 1 from a Partition

2 keypad

(See Section 3.6 “Global and Partition Keypad Operation”)

[02] - Select Partition 2

Provides an easy way to select Partition 2 operation from a Partition 1 keypad. This is the same as

pressing and holding the [#] key then pressing and holding the [2] key to select Partition 2 from a Partition

1 keypad

(See Section 3.6 “Global and Partition Keypad Operation”)

[03] - Stay Arm

Same as described in Function Keys - Section 3.5.

[04] - Away Arm

Same as described in Function Keys - Section 3.5.

[05] - [

]+[9] No-Entry Delay Arm

After this function key is pressed the user must enter a valid user code. The Partition will arm and remove

entry delay from the partition when the exit delay expires

(See Section 3.4 “[ ] Commands, [ ] [9] Arming

without entry delay”)

[06] - [

]+[4] Doorchime On/Off

This function key provides the user a simple method for turning the Doorchime feature on and off

(See

Section 3.4 “[

] Commands, [ ] [4] Doorchime on/off”)

[07] - [

]+[6]...[4] System Test

This function key provides the user with a simple method for testing the system

(See Section 3.4 “[ ]

Commands, [

] [6] User functions”)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Comentarios a estos manuales

Sin comentarios

DSC Power832 Security System PC5016 Especificaciones Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC Power832 Security System PC5016