DSC Power832 Security System PC5016 Especificaciones descargar pdf (Pagina 25)

P R O G R A M D E S C R I P T I O N S

5.6.3 SIA (Level 2)

SIA is a specialized format that will communicate information quickly using frequency shift keying (FSK)

rather than pulses. The SIA format will automatically generate the type of signal being transmitted, such as

Burglary, Fire, Panic etc. The two digit reporting code is used to identify the zone or user code number.

If the SIA format is selected the panel can be programmed to automatically generate all zone

and user codes numbers eliminating the need to program these items.

If the SIA Sends Automatic Reporting Codes option is enabled the panel will operate as follows:

1.If the reporting code for an event is programmed as [00] the panel will not attempt to call the central station.

2.If the reporting code for an event is programmed as anything from [01] to [FF] the panel will

AUTOMATICALLY generate the zone or user code number.

3.Bypassed zones will always be identified when partial closing the system.

The Communicator Call Direction Options can be used to disable reporting of events such as Openings/

Closings. Also, if all the Opening/Closing reporting codes were programmed as [00] the panel would not

report.

If the SIA Sends Automatic Reporting Codes option is disabled the panel will operate as follows:

1.If the reporting code for an event is programmed as [00] or [FF] the panel will not attempt to call central

station.

2.If the reporting code for an event is programmed as anything from [01] to [FE] the panel will send the

programmed reporting code.

3.Bypassed zones will never be identified, regardless of reporting code for “partial closing”.

Refer to Appendix B for a list of SIA identifiers.

Communicator Format ................................... Section [360]

SIA Sends Automatic Reporting Codes ........ Section [381], Option [3]

Communicator Call Direction Options ........... Section [361] to [368]

SIA Identifiers ................................................ Appendix B

5.6.4 Pager Format

The Communicator Format option for either phone number can be programmed for Pager Format. If an

event occurs and the Communicator Call Direction options direct the call to a phone number with the

Pager Format selected the panel will attempt to page.

When calling a pager extra digits will be required to make it work properly.

The following is a list of Hex digits and what function they perform:

Hex [B] - simulates the [

] key on a touch tone phone

Hex [C] - simulates the [#] key on a touch tone phone

Hex [D] - forces the panel to search for dial tone

Hex [E] - two second pause

Hex [F] - end of phone number marker

The panel will attempt to call the pager one time. After dialing the digits in the phone number the panel will

send the account number and reporting code followed by the [#] key (Hex [C]).

The panel has no way of confirming if the pager was called successfully which means a failure to

communicate trouble will never be generated.

Communicator Format Options ..................... Section [360]

Communicator Call Direction Options ........... Section [361] to [368]

5.6.5 200 Baud FSK

200 baud FSK is a specialized format that will communicate information quickly using frequency shift

keying (FSK) rather than pulses. A one-digit identifier is transmitted along with a two-digit reporting code

which is used to identify the zone, user code number or event.

The 200 baud FSK format uses five-digit reporting codes with the last digit programmed as a zero (0).

The Communicator Call Direction Options can be used to disable reporting of events such as Openings/Closings.

Also, if all the Opening/Closing reporting codes were programmed as [00] the panel would not report.

If the 200 baud FSK Open/Close Identifier Toggle is OFF, Closing (Arming) will send an identifier of 1 and

Opening (Disarmings) will send an identifier of 2. Similarly, if the 200 baud FSK Open/Close Identifier Toggle

is ON, Closings (Arming) will send an identifier of 2 and Opening (Disarmings) will send an identifier of 1.

Communicator Format Options ..................... Section [360]

Communicator Call Direction Options ........... Section [361] to [368]

200 Baud FSK Open/Close Identifier Toggle ... Section [381], Option 5

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Comentarios a estos manuales

Sin comentarios

DSC Power832 Security System PC5016 Especificaciones Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC Power832 Security System PC5016