DSC Power832 Security System PC5016 Especificaciones descargar pdf (Pagina 33)

P R O G R A M D E S C R I P T I O N S

5.17 Swinger Shutdown

The swinger shutdown feature is designed to prevent a runaway communicator from tying up the central

station. Different limits can be programmed for Zone Alarms, Zone Tampers

and Maintenance

signals.

After the panel has communicated the programmed number of transmissions for an event it will no longer

report that event until the swinger shutdown is reset.

For example, the swinger shutdown limit for Zone Alarms is set to [003]. The panel will not send more than

3 alarm signals for each zone with a swinger attribute until the swinger shutdown is reset.

Swinger Shutdown

will be reset when the panel is armed or every day at midnight. Once reset, the panel

will again communicate normally.

Swinger Shutdown Limit (Alarms) ................. Section [370]

Swinger Shutdown Limit (Tampers) .............. Section [370]

Swinger Shutdown Limit (Maintenance)........ Section [370]

5.18 Transmission Delay

If Transmission Delay is selected for a zone the panel will delay reporting the alarm for the number of

seconds programmed for Transmission Delay Time. If the panel is disarmed before the delay time

expires the panel will not report the alarm to central station. If the panel is not disarmed in time the panel

will communicate normally.

This is a global feature.

Transmission Delay Enable ........................... Sections [101] to [132], Option [7]

Transmission Delay Time ............................... Section [370]

5.19 Keypad Backlighting

The keys of all the keypads can be backlit to provide easy viewing in dim lighting conditions. If the

Keypad Backlighting Option

is enabled the keys will be illuminated.

Keypad Backlighting Option .......................... Section [016], Option [5]

5.20 Arming /Disarming Options

If the Arm/Disarm Bell Squawk option is enabled the panel will squawk the alarm output once upon

arming and twice upon disarming. The Opening After Alarm Keypad Ringback option will give you the

ability to beep the keypad 10 times rapidly if the panel is disarmed after an alarm occurred. The Opening

After Alarm Bell Squawk

option will give you the ability to squawk the bell output 10 times rapidly if the

panel is disarmed after an alarm occurred.

Closing Confirmation, if enabled, will cause the keypad to beep 10 times rapidly after the closing

reporting code has been transmitted to central station.

Arm/Disarm Bell Squawk............................... Section [014], Option [1]

Opening After Alarm Keypad Ringback......... Section [381], Option [1]

Opening After Alarm Bell Ringback............... Section [381], Option [2]

Closing Confirmation ..................................... Section [381], Option [4]

5.21 Automatic Arming

There are two different Auto-Arming methods available. Each Partition can be programmed to Auto-Arm at

a specific time every day if it is in the disarmed condition. Also a Partition can also be programmed to

Auto-Arm if no activity is registered for a programmed number of minutes.

Before the Auto-Arm at a specific time function will work correctly the present Time of Day

must be

programmed.

When the internal panel clock matches the Auto-Arm Time

the panel will check the status of the Partition.

If armed, the panel will do nothing until the next day at the Auto-Arm Time, when it will check again.

If disarmed the panel will sound the buzzer of all keypads assigned to the partition for one minute. If a

valid User Code is entered the Auto-Arm will be aborted. The panel will also transmit an Auto-Arm Abort

Reporting Code

if programmed.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Comentarios a estos manuales

Sin comentarios

DSC Power832 Security System PC5016 Especificaciones Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC Power832 Security System PC5016