If the system is armed using the Stay button (Programmable Function Key) or using the "No Entry" Arming method (
[access code]), the audible progress annunciation (keypad buzzer) will be silenced and the exit time will be doubled for
that exit period only.
Remote Arming and Disarming
The system can be armed and/or disarmed using the remote control device (wireless key) model DSC WS4939. When
arming the system by using the Arm button on the wireless key, the system will acknowledge the command by sounding
a single bell squawk. When disarming using the Disarm button on the wireless key, the system will acknowledge the
command by sounding two bell squawks that can be heard from the exterior of the premises.
Bypassing Zones
Use the zone bypassing feature when you need access to a protected area while the system is armed, or when a zone is
temporarily out of service, but you need to arm the system. Bypassed zones will not be able to sound an alarm.
Bypassing zones reduces the level of security. If you are bypassing a zone because it is not working, call a service
technician immediately so that the problem can be resolved and your system returned to proper working order. Ensure
that no zones are unintentionally bypassed when arming your system.
Zones cannot be bypassed once the system is armed. Bypassed zones are automatically cancelled each time the system
is disarmed and must be bypassed again, if required, before the next arming.
Note: For security reasons, your installer has programmed the system to prevent you from bypassing certain zones (e.g.,
smoke detectors).
Bypassing Zones with a PK5500/LCD5500 Keypad
Start with disarming the system.
1. Press [*] to enter the function menu. The keypad will display “Press [*] for < > Zone Bypass”.
2. Press [1] or [*] or , then your [access code] (if required). The keypad will display “Zone Search < > Zone Name”.
3. Enter the two-digit number of the zone(s) to be bypassed (01-64). You can also use the [< >] keys to find the
zone to be bypassed, and then press [*] to select the zone.
The keypad will display “Zone Search < > “Zone Name?”. “B” will appear on the display to show that the zone is
bypassed. If a zone is open (e.g., door with door contact is open), the keypad will display “Zone Search < > “Zone
Name” O”. If you bypass the open zone, a “B” will replace the “O”.
4. To unbypass a zone, enter the two-digit number of the zone(s) to be bypassed (01-64). You can also use the [< >]
keys to find the zone, and then press [*] to select the zone. The “B” will disappear from the display to show that
the zone is no longer bypassed.
5. To exit bypassing mode and return to the Ready state, press [#].
Bypassing Zones with a PK5500/LCD5500 Keypad
Start with disarming the system.
1. Press [*][1], then your [access code] (if required).
2. Enter the two-digit number of the zone(s) to be bypassed (01-64). On PK5508/PK5516/PC55XXZ keypads, the
zone light will turn on to indicate that the zone is bypassed.
3. To unbypass a zone, enter the two-digit number of the zone (01-64). On PK5508/PK5516/PC55XXZ keypads, the
zone light will turn off to indicate that the zone is not bypassed.
4. To exit bypassing mode and return to the Ready state, press [#].
(48 paginas)
(12 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales