DSC Power432 PC585 Manual de instalación Pagina 43
- Pagina / 56
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Programming Worksheets
39
[352] Test Transmission Reporting Codes (Section 5.8 “Communicator – Reporting Codes” & Appendix A)
I_______I_______I 1. Periodic Test Transmission I_______I_______I 3. LINKS1000 Test Transmission Code*
I_______I_______I 2. System Test
*The LINKS Test Transmission Code must be programmed as “00” for the LINKS Test Transmission to be disabled.
[353] Wireless Maintenance Reporting Codes
(Section 5.8 “Communicator – Reporting Codes” & Appendix A)
I_______I_______I 1. Wireless Device Low Battery Alarm I_______I_______I 2. Wireless Device Low Battery Restore
[360] Communicator Format Options
(Section 5.9 “Communicator – Reporting Formats”)
NOTE: The Third telephone number follows the format of the First telephone number.
Default
02 I_______I_______I 1st/3rd Telephone Number
02 I_______I_______I 2nd Telephone Number
01 20 BPS, 1400 HZ handshake 04 SIA FSK 07 10 BPS, 1400Hz Handshake
02 20 BPS, 2300 HZ handshake 05 Pager 08 10 BPS, 2300Hz Handshake
03 DTMF CONTACT ID 06 Residential Dial
[361] Alarm/Restore Communicator Call Directions (Section 5.5 “Communicator – Dialing”)
Default Option ON OFF
ON
I_______I 1 1st Telephone Number Disabled
OFF
I_______I 2 2nd Telephone Number Disabled
OFF
I_______I 3 1st Telephone Number (via LINKS) Disabled
OFF
I_______I 4 2nd Telephone Number (via LINKS) Disabled
OFF I_______I 5-8 For future use
[363] Tamper/Restore Communicator Call Directions
(Section 5.5 “Communicator – Dialing”)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF I________I 2 2nd Telephone Number Disabled
OFF
I________I 3 1st Telephone Number (via LINKS) Disabled
OFF I________I 4 2nd Telephone Number (via LINKS) Disabled
OFF I________I 5-8 For future use
[365] Opening/Closing Communicator Call Directions
(Section 5.5 “Communicator – Dialing”)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF
I________I 2 2nd Telephone Number Disabled
OFF I________I 3 1st Telephone Number (via LINKS) Disabled
OFF
I________I 4 2nd Telephone Number (via LINKS) Disabled
OFF I________I 5-8 For future use
[367] System Maintenance Alarm/Restore Communicator Call Directions
(Section 5.5 “Communicator – Dialing”)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF I________I 2 2nd Telephone Number Disabled
OFF
I________I 3 1st Telephone Number (via LINKS) Disabled
OFF I________I 4 2nd Telephone Number (via LINKS) Disabled
OFF I________I 5-8 For future use
[368] System Test Transmissions Communicator Call Directions
(Section 5.5 “Communicator – Dialing”)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF
I________I 2 2nd Telephone Number Disabled
OFF I________I 3 1st Telephone Number (via LINKS) Disabled
OFF I________I 4 2nd Telephone Number (via LINKS) Disabled
OFF
I________I 5-8 For future use
NOTE: The LINKS1000 backup call directions will only back up their respective telephone numbers.
- Installation 1
- Limited Warranty 2
- WARNING Please Read Carefully 2
- Table of Contents 3
- PC585 Wiring Diagram 4
- 1.1 Specifications 5
- 1.2 Additional Devices 6
- 1.3 Out of the Box 6
- Section 2: Getting Started 7
- 2.5 Keypad Assignment 9
- 2.6 Supervision 9
- 2.7 Removing Modules 9
- 2.8 Zone Wiring 9
- 2.9 Fire Zone Wiring 10
- 2.10 LINKS Zone Wiring 10
- 2.11 Keypad Zones 10
- Section 3: Keypad Commands 12
- 3.5 Function Keys 15
- Section 4: How to Program 17
- 4.5 Viewing Programming 18
- 5.2 Zone Programming 19
- 5.3 Zone Attributes 20
- 5.4 Assigning Keypad Zones 21
- 5.5 Communicator – Dialing 21
- 5.10 Downloading 24
- 5.11 PGM Output Options 25
- 5.13 Bell 27
- 5.14 Test Transmission 27
- 5.15 Transmission Delay 27
- 5.17 Arming/Disarming Options 27
- 5.18 Entry/Exit Delay Options 28
- 5.19 Swinger Shutdown 28
- 5.28 Clock Adjust 30
- 5.29 Timebase 30
- 5.31 Installer’s Lockout 31
- 5.32 Walk Test (Installer) 31
- 5.33 Daylight Savings Time 31
- For the Record 32
- Zone Programming Summary 33
- Keypad Programming 34
- Basic Programming 34
- Programming Worksheets 37
- Advanced System Programming 38
- Attribute: 39
- PGM Option 39
- Communicator Programming 40
- Downloading Options 45
- International Programming 45
- Module Programming 46
- Special Installer Functions 46
- Appendix A: Reporting Codes 47
- Codes (as per ADEMCO): 48
- Restoral 48
- ASCII Characters 51
- Changes for PC585 v3.0 56
- PC585 Module Compatibility 56
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC Power432 PC585
(16 paginas)
(12 paginas)
(32 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.108 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales