DSC PC5020 Manual de instalación descargar pdf (Pagina 41)

Redundant Communicator

The panel can be programmed to call using the land line and the

LINKS1000 cellular communicator when an event occurs. To program

this select both the telephone number and the LINKS1000 options

for the Communicator Call Direction Options for the event. In

addition the Call LINKS1000 as well as Land Line option must be

selected. The panel will call the LINKS1000 and then call the land line

when reporting the selected event.

LINKS1000 Special Preamble

In some areas of North America, dialing #DAT or *DATA reduces the

cellular billing increment. The LINKS1000 Special Preamble (sec-

tion [393]), allows the use of [*] and [#] characters for the program-

ming of #DAT and *DATA. The LINKS1000 Special Preamble is sent

BEFORE the Preamble programmed in Sections [390] to [392]. Exam-

ple: [Special Preamble][Regular Preamble][Telephone Number]

NOTE: If this Special Preamble is programmed, it will be inserted

before the Regular Preamble of ALL telephone numbers. Hex digits D

and E are not supported for Preamble programming. If Busy Tone

Detection is enabled, the LINKS1000 must be tested to ensure full

operation.

Refer to the LINKS1000 Installation Manual for more information

and connection diagrams.

(Downloading Telephone Number) . . . . . . . . . . . . . . . Section [490]

Communicator Call Direction Options . . . . . Section [351] to [376]

Call LINKS1000 as well as Land Line . . . . . Section [380], Option [7]

Maximum Dialing Attempts . . . . . . . . . . . . . . . . . . . Section [165][

This 4-digit number can be used with long distance telephone num-

bers that are dialed through the LINKS Module. These codes are used

for programming area codes in cases where a land line telephone

number may be a local call, while the cellular telephone number

dialed by the LINKS module is a long distance call.

[393] - LINKS Special Function Preamble

This special preamble is inserted before all other preambles. It is used

for dialing such cellular numbers as #DAT and *DATA for reduced

billing increments.

5.7 Downloading Options PWS Sect 7

Downloading

Downloading allows programming of the entire control panel via a

computer, modem and telephone line. All functions and features,

changes and status, such as trouble conditions and open zones can

be viewed or programmed by downloading.

NOTE: When power is applied to the panel, a 6 hour downloading

window can be enabled. This will allow you to perform downloading

without having to do any keypad programming.

NOTE: When an event occurs that the system is programmed to

communicate to the central station, the panel will disconnect from

the downloading computer and report the event. This will happen

for all events except test transmissions.

If the Answering Machine/Double Call option is enabled (or dur-

ing the first 6 hours after power up) the panel will answer incoming

calls for downloading provided the following conditions occur:

1. The panel hears one or two rings then misses a ring.

2. At this point the panel will start a timer.

3. If the panel hears another ring before the Answering Machine

Double Call Timer expires it will answer on the first ring of the

second call.

The panel will immediately go on line and begin the download pro-

cess unless the Call Back option is enabled. If enabled, the panel and

computer will both hang up. The panel will then call the Download

Computer Telephone Number and wait for the computer to

answer. Once the computer answers downloading will begin.

If the User Enabled DLS Window option is ON, the user can acti-

vate the downloading feature by entering [*][6][Master Code][5].

Six hours after power up, the panel will not answer incoming calls

unless the Answering Machine/Double Call option is enabled, or

the Number of Rings is programmed to be more than [0].

If the User Initiated Call-Up option is enabled, the user can have

the panel initiate a call to the downloading computer by pressing

[*][6][Master Code][6].

The Download Access Code and Panel Identifier Code are for

security and proper identification. Both the panel and the computer

file should have the same information programmed before attempt-

ing to download.

The time to complete a successful download can be significantly

reduced with the use of the PC-Link. This adaptor makes it possible

to perform on-site downloading. To Initiate Local Downloading

via the PC-Link, enter [

✱] [8] [Installer’s Code] [499] [Installer’s

Code] [499]. All keypads will be busy for the duration of the PC-Link

connection. The status LEDs will display the current system status on

the keypad where the PC-Link was initiated. For more information on

connecting the PC-Link, refer to your “PC-Link Download Kit Instruc-

tion Sheet”.

Downloading can also be performed through the LINKS1000 cellular

communicator if the telephone line is disconnected. If using the

LINKS1000 with Call Back, you need to program the LINKS1000

Preamble with the downloading telephone number in order for the

panel to call the computer correctly.

NOTE: When uploading labels from LCD keypads, the DLS software

will receive the labels only from the LCD keypad assigned to slot 8. In

addition, version 1.0 and version 2.0 LCD keypads are not compati-

ble on the same system. For more information refer to the Download

Manual included with the computer software.

NOTE: The most recent version of the LCD5500 keypad on the sys-

tem should be assigned to slot 8.

Answering Machine Double Call Timer . . . . . . . . . . . Section [405]

Download Computer Telephone Number . . . . . . . . . Section [402]

Download Access Code. . . . . . . . . . . . . . . . . . . . . . . Section [403]

Panel Identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [404]

LINKS1000 Preamble (Downloading) . . . . . . . . . . . . . Section [490]

WWW.DIYALARMFORUM.COM

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 52 53

Comentarios a estos manuales

Sin comentarios

DSC PC5020 Manual de instalación Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC5020