DSC Classic PC580 Manual de instrucciones descargar pdf (Pagina 2)

Section One

Hardware and Software Requirements

You will need the following hardware to run the DLS-2 software:

• 80486 DX4 or higher IBM PC or compatible strongly recommended

• colour monitor

The minimum video resolution required to use DLS-2 is 640 x 480 pixels. For

DLS-2 to display properly, use the “small fonts” setting for the font size.

See your Windows manual for information on changing display properties.

• 1 modem capable of 300 baud communication. Refer to "Compatible Modems" on

page 3 for a list of supported modems.

• 4 megabytes of RAM memory

• 1 1.44 megabyte 3½" disk drive

• 1 mouse

• 1 hard disk drive with at least 25 megabytes of free space for full installation of

DLS-2 and DLS-1. If DLS-1 support is not used, 10 megabytes of free space will

be required for installation.

• 1 printer (optional)

You will need the following software installed on your computer to run the DLS-2

software:

• DLS-1 Version 6.5U or 6.5C

• Microsoft MS-DOS Version 5.0 or later

• Microsoft Windows Version 3.11 or Windows 95

The DLS-2 software is not compatible with operating systems other than Microsoft

Windows.

Compatible Control Panels

The DLS-2 software provides uploading and downloading for the following DSC Alarm

Control Panels:

• Maxsys PC4010, Version 2.x and 3.0

• Maxsys PC4020, Version 2.x and 3.0

• Maxsys PC4020KT, Version 1.0

1 2 3 4 5 6 7 ... 78 79

Sin comentarios

DSC Classic PC580 Manual de instrucciones Pagina 2