
63
Modem Configuration
The Modem Configuration window allows the type of modem being used for
communications when communicating with any PC4010/4020 v2.X, PC4010/4020 v3.0
or PC4020KT v1.0 account. Other modem-related settings can also be changed from
this window. The modem to be used and the COM Port will normally be selected during
installation of the DLS-2 software.
Note that the modem configuration for communications with DLS-1 accounts mustNote that the modem configuration for communications with DLS-1 accounts must
Note that the modem configuration for communications with DLS-1 accounts mustNote that the modem configuration for communications with DLS-1 accounts must
Note that the modem configuration for communications with DLS-1 accounts must
be done from within the Program Configuration of the DLS-1 v6.5 software. Anybe done from within the Program Configuration of the DLS-1 v6.5 software. Any
be done from within the Program Configuration of the DLS-1 v6.5 software. Anybe done from within the Program Configuration of the DLS-1 v6.5 software. Any
be done from within the Program Configuration of the DLS-1 v6.5 software. Any
changes that are made to the modem settings within the DLS-2 Modem Configurationchanges that are made to the modem settings within the DLS-2 Modem Configuration
changes that are made to the modem settings within the DLS-2 Modem Configurationchanges that are made to the modem settings within the DLS-2 Modem Configuration
changes that are made to the modem settings within the DLS-2 Modem Configuration
window will have no affect on modem settings being used for DLS-1 accounts.window will have no affect on modem settings being used for DLS-1 accounts.
window will have no affect on modem settings being used for DLS-1 accounts.window will have no affect on modem settings being used for DLS-1 accounts.
window will have no affect on modem settings being used for DLS-1 accounts.
Configuring the Modem
1.1.
1.1.
1. From the Options menu, select
‘Modem Configuration’. The Modem
Configuration window will be
displayed.
2.2.
2.2.
2. To have the DLS-2 software
communicate locally with a PC4010/
4020 v3.0 account without the need
for a modem, select
Enable PCLinkEnable PCLink
Enable PCLinkEnable PCLink
Enable PCLink.
An “X” indicates that
Enable PCLinkEnable PCLink
Enable PCLinkEnable PCLink
Enable PCLink
is selected. When PCLink is selected,
all fields on the Modem Configuration
window will be greyed out except the
Com PortCom Port
Com PortCom Port
Com Port field. You will need to
select a COM port to use
PCLinkPCLink
PCLinkPCLink
PCLink.
Note: Do not have the PCLink cable attached to the panel when communicating
with the modem. Do not use the PCLink option unless you will be communicating
with accounts that are v3.0 or later.
3.3.
3.3.
3. Click the
button for the
Modem UsedModem Used
Modem UsedModem Used
Modem Used field to scroll through the list of
supported modems:
Supported ModemsSupported Modems
Supported ModemsSupported Modems
Supported Modems
ModelModel
ModelModel
Model
Practical Peripherals 1200Sa Mini External PM 1200 SA Mini External
Cardinal 2400 External MB2400EX
InComm 2400 External Classic 24E
SupraModem 2400 External 50 - 2400 - 0
Hyundai 1200 External HMD-1202
Hayes Smartmodem Optima 2400 External 4700AM
DSC MD-12 v1.1 External MD-12 - Software v1.1
DSC MD-12 v1.0 External MD-12 - Software v1.0
Stradcom Pocket Modem
Click on the desired modem to select it. If your modem does not appear in the
list, select CUSTOM (USER DEFINED).
Comentarios a estos manuales