DSC Classic PC580 Manual de instrucciones descargar pdf (Pagina 8)

Finding a Programming Section

Once you have selected a programming area by clicking on the control panel or a

module icon, use one of the following methods to find the specific programming section

you want:

1. Scroll through the list of programming sections and click on the button for the

programming section you want.

2. Click on the drop down list beside the Choose Dialog field to display a list of the

titles of all the programming sections available in the account. If you know the title

of the programming section to be edited, click on the Choose Dialog field and

begin typing the title. As each digit is entered, the button for the programming

section with a title that most closely matches the digits that were entered will be

displayed. Once the appropriate button is displayed, click on the button to display

the window for the programming section.

3. When editing a PC4010/4020 v3.0 account, you may also enter a Programmers

Reference number in the Goto Programmers Reference # field. Enter the reference

number and then press ENTER or click GO. The appropriate programming

section is displayed. If you enter an invalid reference number, an "Invalid

Reference Number" error message will appear. Refer to the PC4010 or PC4020

v3.0 Programming Worksheets for a list of reference numbers.

NOTE: There is no reference number for the Event Buffer, User Codes or Status

sections. Use one of the other two methods to go to these programming sections.

Entering Programming Information

If you will be calling the panel from the computer to initiate downloading or uploading,

make sure the telephone number is entered in the Panel Phone field of the Account

Information window. Next, ensure that the Panel Identifier Code and Downloading

Access Codes are the same in the account as they are in the customers security system.

If they are not the same, enter them in the DLS Section.

Most of the Programming Section windows will have a Save and Cancel button. When

you have finished programming a section, click Save to save your work. Clicking Cancel

will cancel all the changes you made and return you to the programming section

selection window.

Execute Communications Functions

When a DLS-2 session is started, two applications are opened: the main DLS-2 window

and the DSC Communications Window. The Communication Window is used to perform

all communications functions.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 78 79

Sin comentarios

DSC Classic PC580 Manual de instrucciones Pagina 8