DSC Classic PC580 Manual de instrucciones descargar pdf (Pagina 65)

13.13.

13. If the DSC MD12 is the selected modem then one of the following baud

rate options can be selected:

Always use 300 -Always use 300 -

Always use 300 - When this option is selected, all communications with

any control panel will be at 300 baud as normal.

Always use 1200 Always use 1200

Always use 1200 – When this option is selected, all communications to

panels that support DSCs proprietary 1200 baud format will be done at

1200 baud.

Auto DetectAuto Detect

Auto Detect – When this option is selected, all communications to panels

that support DSCs proprietary 1200 baud format will be started at 1200

baud. If the telephone line is determined to be unsuitable for 1200 baud,

DLS will automatically switch the baud rate down to 300 baud until the end

of the call.

NOTE: Only DSC MD12 modems with software version 1.1 and later support Baud

Rate Selection. Modems with software versions 1.0 and earlier will always operate

at 300 baud. If you are not sure which version MD-12 you have, you can use the

Diagnose.exe program to determine the modem version. Go to the "Run" dialog

box in Windows and browse to the directory where DLS-2 is installed. Select and

run the program diagnose.exe.

14.14.

14. If the CUSTOM (USER DEFINED) option is selected in the

Modem UsedModem Used

Modem Used

field, click the ADVANCED button to open the Modem Support Window.

Advanced modem support options for user-defined modem configurations

can be entered in this window.

15.15.

15. If you are using the ‘SPEAKER.DRV’ utility to control your system sounds

in Windows, you must have the Interrupts Enabled option selected.

Click "Save" to save the changes or click "Cancel" to cancel changes. The

modem will be re-initialized with the new modem settings.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 78 79

Sin comentarios

DSC Classic PC580 Manual de instrucciones Pagina 65