DSC Classic PC580 Manual de instrucciones descargar pdf (Pagina 28)

Maxsys PC4010 and PC4020 Version 3.0

Make note of the Downloading Access Code and Panel ID Code which can be

programmed in the DLS Section.

This section gives the reference numbers for each programming section. To enter a

reference number, enter Installer's Programming by pressing, [

✱✱

✱][8][Installer’s Code],

then press and hold the [A]uxiliary key. When the keypad displays "Enter Ref # then *",

enter the reference number and press [*] to go to the programming section. For more

information on PC4010/4020 programming see your Installation Manual.

To program the Downloading Access Code, enter ref. # [000304]. To program the Panel

ID Code, enter [000303].

Enter these codes into the DLS-2 account, as well. Make sure that the Panel ID Code

is not the same as the ID Codes in other accounts.

To Have the Computer Call the Control Panel

1.1.

1. Enter Installer's programming. Go to the DLS Toggles section by entering ref.

# [000300]. Ensure that the DLS Enabled (Ring Detect) function is turned on.

If there is an answering machine connected to the same line as the panel,

also ensure that the Double Call function is enabled. Exit the section. Set

the number of rings the panel will answer on in the

# of Rings

programming

section (ref. # [000306]).

2.2.

2. If you require the Callback feature as an additional level of security, go to the

DLS Toggles section by entering ref. # [000300] and enable DLS Callback.

If you enable this feature, you must also program the telephone number of

the downloading computer. Enter ref. # [000302] for

Phone Number

and

program the downloading computer's telephone number.

To User Initiate a Call to the Computer

1.1.

1. To enable the User Call Up function that allows a user to tell the control panel

to call the downloading computer, go to the DLS Toggles section by entering

ref. # [000300]

. Set the User Call Up feature and exit the section.

2.2.

2. When using this feature, a downloading telephone number must be

programmed. Enter ref. # [000302] for

Phone Number

and program the

downloading computer's telephone number.

3.3.

3. To initiate a call to the downloading computer, exit Installer’s Programming,

and then enter

[

✱✱

✱][6][Master Code][7]

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 78 79

Comentarios a estos manuales

Sin comentarios

DSC Classic PC580 Manual de instrucciones Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC Classic PC580