DSC Classic PC580 Manual de instrucciones descargar pdf (Pagina 41)

Status Bar

At the bottom of the Communications Window is a Status Bar. The Status Bar

is used to display communications related messages such as ‘Upload in

Progress’ or ‘Communications Complete’. If the modem has been initialized

properly and there are no communications taking place, the Status Bar will

normally be displaying the message, ‘Waiting for Panel to Call’ or ‘Auto

Answer Disabled’. The messages found on the Status Bar can be translated

by editing the MAIN_100.LDB module in the Edit Language Window. Refer to

Edit Language in Section 6.

Ensure that the modem has been properly initialized before attempting to

communicate. If the modem has not been properly initialized, the message,

‘Modem Error’ or, ‘Error. Modem could not be Initialized’ will be displayed. All

buttons will be removed from the bottom of the Communications Window

except the INITIALIZE MODEM and PRINT buttons.

While on-line with any DLS-1 account or the Escort4580, and when

communication is idle, the DOS window for the account should be brought

to the Foreground or connection to the panel will be terminated. If

communication is taking place, the DOS window for the account can be

placed in the Background until the communications request is completed.

After a Global Download is completed, be sure to download any Status related

features, such as setting the panel time and enabling functions such as Auto

Arming, Door Chime, etc., that may be required for that account.

On slower computers, it may take some time to display each screen. Wait until

the screen is fully displayed before attempting to select any Communications

function.

Saving and Downloading Changes

When changes are made to the information in a window, they must be

downloaded to the alarm system using either Global or Selected Downloading.

Clicking “Save” in the window being edited saves the changes in the DLS-2

file, but does not automatically download the information to the system.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 78 79

Sin comentarios

DSC Classic PC580 Manual de instrucciones Pagina 41