DSC PC6010 Manual de instalación Pagina 13
- Pagina / 52
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
11
This section determines which reporting codes are sent to the selected telephone number. All reporting
codes can be programmed to communicate to any or all of the telephone numbers. By default, all
reporting codes are sent to telephone number 1 only. See “Comms Toggles” for using telephone
numbers 2 and 3 as backup telephone numbers.
YES = The following reporting codes are transmitted to the selected telephone number. See
“Reporting Codes” for a description of these groups of reporting codes.
• Zone Alarms & Restorals
• Zone Troubles & Restorals
• Duress Alarms & Restorals
• Module Tamper Alarms & Restorals
• Police Code Alarms & Restorals
NO = Alarm and Restoral reporting codes are not sent.
YES = The following reporting codes are transmitted to the selected telephone number. See
“Reporting Codes” for a description of these groups of reporting codes.
• Openings and Closings by Users 001-128, Users 129-1000
• Miscellaneous Openings & Closings
• Momentary / Maintained Keyswitch Openings & Closings
NO = Opening and Closing reporting codes are not sent.
YES = The following reporting codes are transmitted to the selected telephone number. See
“Reporting Codes” for a description of these groups of reporting codes.
• System Maintenance
• 6400 Maintenance
• 6204 Maintenance
• 6820 Maintenance
• 6442 Maintenance
• 6443 Maintenance
NO = All other codes are not sent.
When a reporting code is sent to the central station, a six digit account code is also sent to identify the
customer. Each area has its own account code (See “Customer ID Code”). But for reporting codes that
do not pertain to a particular area, such as AC line trouble etc., the system ID code is sent to identify the
panel. The system ID codes and the customer ID codes must be six decimal digits. The reporting code
groups that send the system ID code are:
• Module Tamper Alarms & Restorals
• System Maintenance
• 6400 Maintenance
• 6204 Maintenance
• 6820 Maintenance
• 6442 Maintenance
• 6443 Maintenance
Note: 6442 events may use the Customer ID Code or the System ID Code depending on if the event
is an area or system event.
SYSTEM AREASYSTEM AREA
SYSTEM AREASYSTEM AREA
SYSTEM AREA
COMMUNICATORCOMMUNICATOR
COMMUNICATORCOMMUNICATOR
COMMUNICATOR
MAIN ITEMSMAIN ITEMS
MAIN ITEMSMAIN ITEMS
MAIN ITEMS
OPEN/CLOSEOPEN/CLOSE
OPEN/CLOSEOPEN/CLOSE
OPEN/CLOSE
NN
NN
N
DIALER DIRECTIONDIALER DIRECTION
DIALER DIRECTIONDIALER DIRECTION
DIALER DIRECTION
(1)(1)
(1)(1)
(1)
ALARALAR
ALARALAR
ALAR
M/M/
M/M/
M/
RESTORERESTORE
RESTORERESTORE
RESTORE
YY
YY
Y
ALL OTHERSALL OTHERS
ALL OTHERSALL OTHERS
ALL OTHERS
NN
NN
N
SYSTEM ID CODESYSTEM ID CODE
SYSTEM ID CODESYSTEM ID CODE
SYSTEM ID CODE
(3)(3)
(3)(3)
(3)
- Programming Manual 1
- Introduction 3
- Main Programming Sections 4
- Installer Options 5
- System Options 6
- Keypad Lockout Options 7
- System Times 7
- Arm/Disarm Mask 8
- Zone Supervision 8
- Download Section 9
- Other DLS Programming 10
- Communicator Section 11
- SIA 1986 Format 12
- Contact ID 12
- Communicator Toggles 14
- Communicator Miscellaneous 16
- Test Code Transmission 16
- Reporting Codes 17
- Links Module 22
- Switched Auxiliary Output 23
- Main Bell Output 23
- PGM Outputs 24
- PGM Pulse Times 25
- Programmable Output Options 26
- Event Scheduling 30
- PC6820 Options 35
- Area Section 39
- Area Times 40
- Zone Assignment 41
- Zone Type 42
- Zone Options 44
- Alarm and Seismic Groups 45
- Area Label 45
- Delete/Copy Area 45
- Backbone Section 46
- Module Hardware 47
- Event Buffer 48
- Diagnostics 48
- Appendix A 49
- Appendix B 50
- Table 2: 51
- Zone Reporting Codes 51
- Toronto, Canada 52
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC6010
Los Sistemas De Control De Acceso De Seguridad DSC Power832 Security System PC5016 Información técnica
(10 paginas)
(10 paginas)
Los Sistemas De Control De Acceso De Seguridad DSC Power832 PC5015 Manual de instrucciones
(17 paginas)
(17 paginas)
Los Sistemas De Control De Acceso De Seguridad DSC PC1500 - REV8 Manual de instrucciones
(16 paginas)
(16 paginas)
Los Sistemas De Control De Acceso De Seguridad DSC MAXSYS PC4010 Manual de instrucciones
(36 paginas)
(36 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.062 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales