DSC PC6010 Manual de instalación descargar pdf (Pagina 32)

SYSTEM AREASYSTEM AREA

SYSTEM AREA

EVENT SCHEDULINGEVENT SCHEDULING

EVENT SCHEDULING

Example:

Setting up a date schedule to control programmable outputs:

PGM1 output programmed for Date Schedule following

Date Schedule - 04

Pulse Timer - 10

PC6204 - output number 2 programmed for Date Schedule following

Date Schedule number 04

Pulse Timer - 00

Date Schedule 04 has been programmed with

Start Time End Time Day Holiday AutoArm AutoDisarm

(HHMM) (HHMM) S M T W T F S 1 2 3 4 Y/N Y/N

Interval 1 0830 0900 N Y Y Y Y Y N N N N N N N

Interval 2 1200 1230 N Y Y Y Y Y N N N N N N N

Interval 3 1230 1231 N Y Y Y Y Y N N N N N N N

Interval 4 1700 1800 N N N N N N N N N Y N N N

Holiday Group #3 - Is programmed with the following day 1225 (December 25)

In this example, PGM1 will activate every Monday, Tuesday, Wednesday, Thursday and Friday.

It will activate 3 times each day: 8:30AM,12:00PM,12:30PM, for ten seconds each time (this was done by

programming the PGM output pulse timer to 10 instead of leaving it at 00).

This PGM1 will also activate on December 25 (1225) at 5:00PM for 10 seconds regardless of what day of

the week it is.

PC6204 relay number 2 will activate on the same days (as well as December 25) and at the same times, but

will remain on until the programmed End Time occurs. This was accomplished by programming 00 into

the Pulse Timer section for that output.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Sin comentarios

DSC PC6010 Manual de instalación Pagina 32