DSC PC6010 Manual de instalación descargar pdf (Pagina 17)

PC6216 16 PC6216 16

PC6216 16

O/O/

(3)(3)

(3)

PC6108 ZONE EXPPC6108 ZONE EXP

PC6108 ZONE EXP

(2)(2)

(2)

PC6204 O/PPC6204 O/P

PC6204 O/P

(4)(4)

(4)

PC6820 ACCESSPC6820 ACCESS

PC6820 ACCESS

(5)(5)

(5)

Reporting Codes

Reporting codes are 2 digit codes which are sent to the receiver at the central station, along with the area ID

code for each transmission. They identify the type of alarm, and other events to the central station. Once you

have selected which group of reporting codes to program, use the arrow keys to scroll through the

reporting codes. Please see Appendix B for a table of recommended Contact ID reporting codes, and

automatically generated SIA reporting codes.

Enter a 2-digit number for each code you need to program. To disable a reporting code, program it with FF

(default setting). To enter Hex digits, press the [*] key when entering the code, to call up the Hex digit entry

menu, and to “Save and Exit” from the Reporting Codes menu.

For example: to enter AB, press [*][1][*][2]

to enter A2, press [*][1][2]

Alarm Reporting Codes for Zones 001 to 256. Momentary and maintained arm zones will send the

reporting code programmed in this section for a closing. All reporting codes are programmed as [FF] at

default.

Restoral Reporting Codes for Zones 001 to 256. The zone restoral will be sent to the central station when a user

clears the alarm. Momentary and maintained arm zones will send the reporting code programmed in this section

for an opening. All reporting codes are programmed as [FF] at default.

Zone Trouble Reporting codes for zones 001 to 256. The system will send zone trouble reporting codes (if

programmed) when there is a zone trouble on standard fire and auto verifying fire zones, or when a tamper

occurs on other zone types. All reporting codes are programmed as [FF] at default.

Zone Trouble Restoral Reporting codes for zones 001 to 256. The system will send zone trouble reporting

codes (if programmed) when zone troubles are restored on standard fire and auto verifying fire zones, or when

tampers are restored on other zone types. All reporting codes are programmed as [FF] at default.

Program reporting codes for tamper alarms on modules.

There are 16 keypad tamper alarm reporting codes, one for each keypad that can be enrolled on the

system.

This is the PC6400 tamper alarm reporting code.

There are 30 reporting codes for tamper alarms on PC6108 zone expansion modules. The maximum

number of expansion modules you will use is 30. (30 x 8 zones = 240 zones + 16 zones on the main panel

= 256 zones)

There are 9 module tamper alarm reporting codes, one for each PC6216 module that can be enrolled onto

the system.

There are 16 module tamper alarm reporting codes, one for each PC6204 module that can be enrolled onto

the system.

There are 16 module tamper alarm reporting codes sections, one for each PC6820 Access Control module

that can be enrolled on the system.

This is the PC6442 tamper alarm reporting code.

This is the PC6443 tamper alarm reporting code.

ZONE RESTOREZONE RESTORE

ZONE RESTORE

(01)(01)

(01)

ZONE TROUBLEZONE TROUBLE

ZONE TROUBLE

(02)(02)

(02)

ZONE TROB.RESTZONE TROB.REST

ZONE TROB.REST

(03)(03)

(03)

MOD TAMP ALARMMOD TAMP ALARM

MOD TAMP ALARM

(04)(04)

(04)

PC6501 KEYPADSPC6501 KEYPADS

PC6501 KEYPADS

(0)(0)

(0)

PC6400 RS-232PC6400 RS-232

PC6400 RS-232

(1)(1)

(1)

REPORTING CODESREPORTING CODES

REPORTING CODES

(3)(3)

(3)

ZONE ALARMZONE ALARM

ZONE ALARM

(00)(00)

(00)

SYSTEM AREASYSTEM AREA

SYSTEM AREA

COMMUNICATORCOMMUNICATOR

COMMUNICATOR

REPORTING CODESREPORTING CODES

REPORTING CODES

PC6442 APUPC6442 APU

PC6442 APU

(6)(6)

(6)

PC6443 ODSPC6443 ODS

PC6443 ODS

(7)(7)

(7)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Comentarios a estos manuales

Sin comentarios

DSC PC6010 Manual de instalación Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC6010