DSC PC6010 Manual de instalación descargar pdf (Pagina 19)

SYSTEM AREASYSTEM AREA

SYSTEM AREA

COMMUNICATORCOMMUNICATOR

COMMUNICATOR

REPORTING CODESREPORTING CODES

REPORTING CODES

If a user enters too many incorrect access codes (see “Total Bad Codes” under “Keypad Lockout

Options” for programming the number of incorrect code entries), the keypad will be locked out,

preventing anyone from attempting to enter any more access codes. When keypad lockout occurs, the

keypad lockout reporting code is sent to the central station.

Reporting Codes for Openings.

Reporting codes for users 0001-0128. See “Miscellaneous Openings” for additional users.

Miscellaneous Reporting Codes for Openings.

Opening 129 - 1000 - This reporting code will be sent when any user code from 0129-1000 is used to

disarm an area. In order to identify the user which disarmed the area the panel will first perform a

“User Log” for the user, and then log/transmit the Opening 129-1000 reporting code.

Miscellaneous Reporting Codes for Openings.

Opening After Alarms Reporting Code -The system sends this code to the central station when the

system is disarmed after there was an alarm.

Open Automatic - This reporting code will be sent any time an area on the system is autodisarmed.

The system sends this reporting code when area(s) are opened by the APS software.

The system sends this reporting code when area(s) are opened by the ODS software.

System Maintenance Reporting Codes. There are 27 reporting codes for events relating to the operation and

maintenance of the system. The reporting codes are:

• Battery Trouble and Battery Restoral - If the battery voltage on the PC6010 main panel is weak,

disconnected or if the battery fuse fails, a battery trouble occurs, and the battery trouble reporting code is

sent. When the battery voltage and fuse are restored, the battery restoral code is sent. See the “Viewing

Fault Conditions” section in the System Manual.

• AC Line Trouble and AC Line Restoral - If the incoming AC voltage to the AC terminals fails, an AC

trouble occurs and the AC trouble reporting code is sent to the central station after the AC Fail Tx Delay

has elapsed (see “AC FAIL TX DELAY”). When the incoming AC is restored, the AC restoral reporting code

is sent to the central station. See the “Viewing Fault Conditions” section in the System Manual.

• Main Bell Trouble and Main Bell Restoral - If a bell trouble occurs, either from the bell fuse failure or the

open bell terminals, the Main Bell Trouble reporting code will be sent to the central station. When the

trouble condition is restored, the Main Bell Restoral reporting code will be transmitted.

• Main Aux Trouble and Main Aux Restoral - If an auxiliary voltage supply trouble occurs, the Main Aux

Trouble reporting code is transmitted, and when the auxiliary voltage supply is restored, the Main Aux

Restoral code is transmitted.

• Combus Low Power and Combus Low Power Restoral - When a module on the system has low power,

the Combus Low Pwr reporting code will be transmitted. When the power is fully restored, the Combus

Restoral reporting code will be sent.

• Combus Comm Fault and Combus Comm Restoral - When the system loses communication with a

module, the Combus Trouble reporting code will be transmitted, and when communications resume the

Combus Restoral reporting code will be sent.

• Backbone Trouble and Backbone Restoral - When the system loses communication with a backbone

module, the Backbone Trouble reporting code will be transmitted, and when communications resume the

Backbone Restoral reporting code will be sent.

• TLM Failure - A TLM reporting code will be sent over the backbone when a TLM trouble occurs.

OPEN AFTER ALARMOPEN AFTER ALARM

OPEN AFTER ALARM

OPEN AUTOMATICOPEN AUTOMATIC

OPEN AUTOMATIC

6442 APS OPENING6442 APS OPENING

6442 APS OPENING

SYSTEM MAINTSYSTEM MAINT

SYSTEM MAINT

(10)(10)

(10)

OPENINGSOPENINGS

OPENINGS

(08)(08)

(08)

USERS 1-128USERS 1-128

USERS 1-128

MISC OPENINGSMISC OPENINGS

MISC OPENINGS

(09)(09)

(09)

OPENING 129-1000OPENING 129-1000

OPENING 129-1000

KEYPAD LOCKOUTKEYPAD LOCKOUT

KEYPAD LOCKOUT

6443 ODS OPENING6443 ODS OPENING

6443 ODS OPENING

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Comentarios a estos manuales

Sin comentarios

DSC PC6010 Manual de instalación Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC6010