DSC PC6010 Manual de instalación descargar pdf (Pagina 39)

AREA SECTIONAREA SECTION

AREA SECTION

ADAD

D/D/

EDIT AREAEDIT AREA

EDIT AREA

AREA TOGGLESAREA TOGGLES

AREA TOGGLES

Add/Edit Area. Only area 1 is enabled by default. To enable more areas, select the Add/Edit area section,

then select the area. The area is now enabled.

The PC6010 can be divided into 32 areas. Select an area to program in this section.

Each area has its own 6 digit customer account number that will be transmitted to the central station

when a reporting code is sent. The central station uses the code to identify the customer.

Area Toggles

You can enable or disable any of the following options for each area.

Autoarm enabled?

YES = Auto Arm control enabled.

NO = Auto Arm control disabled. If disabled, areas will not be able to autoarm.

Autoarm squawk enabled?

YES = The bell output will activate for one second every ten seconds during the auto-arm pre-alert.

NO = The bell output will not activate during auto-arm pre-alert.

Bell squawk enabled?

YES = The bell output will activate once briefly when the area is armed, twice when disarmed. All

outputs, when programmed for “Fire and Burg”, “Inv Fire/Burg”, “Burg Only” or “Inv Burg Only”,

will squawk for the assigned area(s).

NO = Bell Squawk disabled.

Bell squawk exit delay?

YES = Bell squawks once every second on exit delay. During the last 10 seconds, bell will squawk twice

every second.

NO = Silent bell on exit delay.

Audible exit fault?

YES = Zone delay will sound the siren for entry delay if zone is still violated at the end of exit delay.

NO = Siren will not be on for entry delay if zone is still violated at the end of exit delay.

Bell squawk entry delay?

YES = Bell squawks once every second on entry delay. During the last 10 seconds, bell will squawk twice

every second.

NO = Bell is silent during entry delay.

Exit delay termination?

YES = During the exit delay exiting through a standard delay, or a force arm delay zone will set the

remainder of the exit delay to 5 seconds once the zone has been restored.

NO = Exit delay will not terminate when a standard delay, or a force arm delay zone is tripped.

NOTE: Do not use Exit Delay Termination with Global Standard Delay Zones.

ADD/EDIT AREAADD/EDIT AREA

ADD/EDIT AREA

(0)(0)

(0)

“AREA X”“AREA X”

“AREA X”

(01) (01)

(01)

(32) (32)

(32)

AREA ID CODEAREA ID CODE

AREA ID CODE

(0)(0)

(0)

Area Section

AREA TOGGLESAREA TOGGLES

AREA TOGGLES

(1)(1)

(1)

AUTOARM ENABAUTOARM ENAB

AUTOARM ENAB

AUTOARM SQUAWKAUTOARM SQUAWK

AUTOARM SQUAWK

BELL SQUAWK ONBELL SQUAWK ON

BELL SQUAWK ON

SQUAWK EX.DELSQUAWK EX.DEL

SQUAWK EX.DEL

AUD.EXIT FAULTAUD.EXIT FAULT

AUD.EXIT FAULT

SQUAWK EN.DELSQUAWK EN.DEL

SQUAWK EN.DEL

EXIT DEL.TERM.EXIT DEL.TERM.

EXIT DEL.TERM.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

Comentarios a estos manuales

Sin comentarios

DSC PC6010 Manual de instalación Pagina 39

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC6010