DSC PC6010 Manual de instalación descargar pdf (Pagina 27)

SYSTEM AREASYSTEM AREA

SYSTEM AREA

PGM OUTPUTSPGM OUTPUTS

PGM OUTPUTS

This output will follow a selected zone. Any one of the 256 zones can be selected. If the zone is opened,

the output will activate. When the zone is closed the output will deactivate.

See “Follows + Alarms” for enabling the output to be a zone follower and zone alarm annunciator.

This output will be turned on for the selected area(s) when a duress type code is used to perform any

function. It will follow the duress output timer.

This output will activate when a programmed area(s) keypad buzzer activates for Entry Delays, Auto Arm

Pre-alert, 24 Hour Buzzer, Tamper and Door Strike.

This option can be remotely activated by area with DLS-3, and remains active until deactivated by the DLS-

3 package.

This option will follow the exit delay timer of the area(s) it is assigned to.

This option will follow the entry delay timer of the area(s) it is assigned to.

This PGM output type may be programmed to follow any one of 99 date schedules. The schedule which the

output is programmed to follow may be activated at any time, and may remain on for up to 24 hours. See “Date

Schedule” for programming details.

This output type will activate when a Hold Up zone has been tripped for the selected area. The output will latch

on when activated. The output will remain active until a valid access code is entered. If the area is already

disarmed the output will remain active until an access code is entered.

This output will activate only when the selected area(s) are fully armed and will remain active until the area is disarmed.

The term “Fully Armed” refers to the area being armed with no zones bypassed, disabled or force armed and all

interior zones armed. The output will deactivate if one or more zones in the area(s) are in alarm. If the output is

programmed to follow more than one area, then the output will not activate until all assigned areas are fully armed.

There are four different “Trouble Groups” that this output type may follow. Each output that is programmed

as Trouble Group may only follow one group at a time. The troubles are divided as follows:

ZONE FOLLOWZONE FOLLOW

ZONE FOLLOW

(18)(18)

(18)

DURESS OUTPUTDURESS OUTPUT

DURESS OUTPUT

(19)(19)

(19)

BUZZER FOLLOWBUZZER FOLLOW

BUZZER FOLLOW

(20)(20)

(20)

REMOTE OPERATIONREMOTE OPERATION

REMOTE OPERATION

(21)(21)

(21)

EXIT FOLLOWEXIT FOLLOW

EXIT FOLLOW

(22)(22)

(22)

ENTRY FOLLOWENTRY FOLLOW

ENTRY FOLLOW

(23)(23)

(23)

DATE SCHEDULEDATE SCHEDULE

DATE SCHEDULE

(24)(24)

(24)

HOLD UPHOLD UP

HOLD UP

(25)(25)

(25)

SETSET

SET

(26)(26)

(26)

TROUBLE GROUPTROUBLE GROUP

TROUBLE GROUP

(27)(27)

(27)

Group #1 Group #2 Group #3 Group #4

6010 Battery Trouble

6010 AC Trouble

6010 AUX Supply Trouble

6010 TLM Trouble

6010 FTC Trouble

6010 Bell Circuit Trouble

6010 Fire Trouble

Module Communication Fault

6204 Battery Trouble

6204 AC Trouble

6204 AUX Trouble

6820 Battery Trouble

6820 AC Trouble

6820 AUX Trouble

6820 Reader Power Trouble

6820 Lock Device Failure

6442 Battery Trouble

6442 AC Trouble

6442 AUX Trouble

6443 Battery Trouble

6443 AC Trouble

6443 AUX Trouble

PC6442 Aps Comm. Fault

PC6443 ODS Comm. Fault

AC Trouble

6204 AC Trouble

6820 AC Trouble

6442 AC Trouble

6443 AC Trouble

6010 Battery Trouble

6010 AUX Supply Trouble

6010 TLM Trouble

6010 FTC Trouble

6010 Bell Circuit Trouble

6010 Fire Trouble

Module Comm. Fault

6204 Battery Trouble

6204 AUX Trouble

6820 Battery Trouble

6820 AUX Trouble

6820 Reader Power Trouble

6820 Lock Device Failure

6442 Battery Trouble

6442 AUX Trouble

6443 Battery Trouble

6443 AUX Trouble

Zone Tamper

Zone Fault

Seismic Detector Test Fault

Battery Trouble

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Comentarios a estos manuales

Sin comentarios

DSC PC6010 Manual de instalación Pagina 27

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC6010