DSC PC6010 Manual de instalación descargar pdf (Pagina 41)

Zone Assignment

This section is for assigning type and options for each individual zone.

By default, the first 16 zones on the main panel are assigned to area 1. If zone expanders have been

enrolled, the zones must be added to an area, in order to have the PC6010 monitor them.

Upon entering this section, the zones which have not been assigned to the selected area will be

displayed. Use [<][>] keys to scroll through the zones. Press the [*] key to add the zone to the selected

area.

When you add zones 017-256 to an area, the system checks that the expander module (PC6108A) is

present. If the system cannot find an PC6108A to support the new zone, the keypad displays “Zone

Hardware Is Not Present” for 3 seconds. This is a warning message that an additional zone expander may

be required. The zone still will be added to the area. When adding zones for access control, program the

zone assignment for the PC6820 door, before adding the zone in the Area programming section. This

way, the PC6010 recognize that the zone is not on an expander module, and will not display the “Zone

Hardware Is Not Present” message.

When you edit the Zone Type or Zone Options of a zone that has been added to more than one area, the

keypad displays the message “Other Areas Have Changed” for 3 seconds. This indicates that the zone

programming you are changing affects other areas.

Global Zones: If zone(s) are added to more than one area (global zones), the zone(s) will follow the

following rules:

• A global zone is not armed until all areas which the zone belongs to are armed.

• A global delay zone will follow the longest delay of all areas which it is assigned to. For example, if area

1 has an entry delay of 30 seconds, and area 2 has an entry delay of 45 seconds, the global delay zone

will not be in alarm until the area 2 entry delay expires.

• If a global zone is manually bypassed and any area that the zone belongs to is disarmed, the bypass will

be removed from the zone.

• A zone which is assigned to multiple areas will send alarms and restorals for the area of the LOWEST

number. (Example - A zone is assigned to areas 2, 3 and 4. This zone will only transmit events for area 2.)

All logs will still be made for each area to which the zone is assigned.

• If there is a global zone in the alarm list and the alarm is reset by APS or ODS software, the sensor reset

will only be performed in the area reset by APS/ODS. Sensors will not be reset in all the areas assigned

to the zone.

Use this section to edit zones which have already been assigned to an area. Upon entering this section,

the zones which have been assigned to the selected area will be displayed. Use the [<] [>] keys to toggle

through the zones, and the [*] key to select the zone to edit.

Edit Zone Type/Options: When you edit the Zone Type or Zone Options of a zone that has been added

to more than one area, the keypad displays the message “Other Areas Have Changed” for 3 seconds. This

indicates that the zone programming you are changing affects other areas.

Use this section to delete zones from the area. When selecting which zone to delete, the keypad will only

display zones which are assigned to the area.

ZONE ASSIGNMENTZONE ASSIGNMENT

ZONE ASSIGNMENT

(3)(3)

(3)

ADD NEW ZONEADD NEW ZONE

ADD NEW ZONE

(0)(0)

(0)

AREA SECTIONAREA SECTION

AREA SECTION

ADAD

D/D/

EDIT AREA EDIT AREA

EDIT AREA

ZONE ASSIGNMENTZONE ASSIGNMENT

ZONE ASSIGNMENT

DELETE ZONEDELETE ZONE

DELETE ZONE

(2)(2)

(2)

EDIT ZONEEDIT ZONE

EDIT ZONE

(1)(1)

(1)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

Comentarios a estos manuales

Sin comentarios

DSC PC6010 Manual de instalación Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC6010