DSC PC6010 Manual de instalación descargar pdf (Pagina 15)

PH 1-2 BACKUPPH 1-2 BACKUP

PH 1-2 BACKUP

PH 1-3 BACKUPPH 1-3 BACKUP

PH 1-3 BACKUP

PH 2-3 BACKUPPH 2-3 BACKUP

PH 2-3 BACKUP

SYSTEM AREASYSTEM AREA

SYSTEM AREA

COMMUNICATORCOMMUNICATOR

COMMUNICATOR

COMMS TOGGLESCOMMS TOGGLES

COMMS TOGGLES

SYSTEM AREASYSTEM AREA

SYSTEM AREA

COMMUNICATORCOMMUNICATOR

COMMUNICATOR

COMMS MISCCOMMS MISC

COMMS MISC

Ringback squawk enabled?

YES = Ringback Squawk option is enabled. If both Ringback and Ringback Squawk are enabled, then after

a successful communication of a closing, the Fire/Burg, Inv Fire/Burg, Burg and Invert Burg outputs

for that area will squawk 4 times.

NO = Ringback Squawk option is disabled.

NOTE: Ringback must be enabled for this feature to function.

Periodic Test Transmission?

YES = The panel will send a test transmission to the central station. See “TEST CODE TX” for information

on programming the time of day, and the frequency the code is sent. See “SYSTEM MAINT” for

programming the reporting code.

NO = The panel will not send a test transmission.

European Dialing?

YES = When the communicator is pulse dialing, the contact closure to the telephone line is made in a 67/33

make/break ratio. This is the European standard method of dialing.

NO = The contact closure to the telephone line is made in a 60/40 make/break ratio. This is the American/

Canadian standard method of dialing.

Dial if No Dial Tone Present?

YES = If the first attempt by the panel to call the central station fails, on every subsequent attempt the

panel will dial regardless of the presence of dial tone.

NO = If a ‘D’ for dial tone search precedes the telephone number, the panel will not dial if a dial tone is

not present. See “PGM TEL NUMBER” for programming the telephone numbers with dial tone

search.

Telephone #2 backs up Telephone #1?

YES = The PC6010 will send the reporting codes to the 2nd telephone number if the 1st telephone

number fails to communicate with the central station after the programmed number of attempts. If

you enable this option, you should disable the dialer directions for the 2nd telephone number.

Otherwise the reporting codes will be sent to the 2nd telephone number, whether the 1st number

failed or not.

NO = Disabled. The 2nd telephone number does NOT back up the 1st telephone number.

Telephone #3 backs up Telephone #1?

YES = The PC6010 will send reporting codes to the 3rd telephone number, if the 1st telephone number

fails to communicate with the central station after the programmed number of attempts. If you

enable this option, you should disable the dialer directions for the 3rd telephone number.

Otherwise the reporting codes will be sent to the 3rd telephone number, whether the 1st number

failed or not. If “PH 1-2 BACKUP” is also enabled, then when 1st telephone number fails the

reporting codes will be sent to both the 2nd and 3rd telephone number.

NO = Disabled. The 3rd telephone number does NOT back up the 1st telephone number.

Telephone #3 backs up Telephone #2?

YES = The PC6010 will send the reporting codes to the 3rd telephone number, if the 2nd telephone

number fails to communicate with the central station after the programmed number of attempts. If

you enable this option, you should disable the dialer directions for the 3rd telephone number.

Otherwise the reporting codes will be sent to the 3rd telephone number, whether the 2nd number

failed or not. If “PH 1-2 BACKUP” is also enabled, then when 1st telephone number fails, the

reporting codes will be sent to the 2nd telephone number. If the 2nd telephone number fails, the

reporting codes will then be sent to the 3rd telephone number.

NO = Disabled. The 3rd telephone number does NOT back up the 2nd telephone number.

Auto SIA?

YES = If the SIA format is selected, the panel can be programmed to automatically generate all zone and

user code numbers, thus eliminating the need to program these items.

If the “Auto SIA” toggle option is enabled, the panel will operate as follows: If an event’s reporting

code is programmed as [00], the panel will not attempt to call the central station. If the reporting

code for an event is programmed as anything from [01] to [FF], the panel will automatically generate

the zone or user code number. See Appendix B for a list of the codes which will be transmitted.

The Communicator Call Direction options can be used to disable the reporting of events such as

openings and closings.

NO = The panel will operate as follows: If an event’s reporting code is programmed as [00] or [FF], the

panel will not attempt to call central station. If the reporting code for an event is programmed as

anything from [01] to [FE], the panel will send the programmed reporting code.

EUROPE DIALEUROPE DIAL

EUROPE DIAL

RINGBACK SQUAWKRINGBACK SQUAWK

RINGBACK SQUAWK

PERIODIC TX ?PERIODIC TX ?

PERIODIC TX ?

DEFAULT DIALDEFAULT DIAL

DEFAULT DIAL

AUTO SIAAUTO SIA

AUTO SIA

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Comentarios a estos manuales

Sin comentarios

DSC PC6010 Manual de instalación Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC6010