DSC PC6010 Manual de instalación descargar pdf (Pagina 18)

PC6216 16 PC6216 16

PC6216 16

O/O/

(3)(3)

(3)

PC6108 ZONE EXPPC6108 ZONE EXP

PC6108 ZONE EXP

(2)(2)

(2)

PC6204 O/PPC6204 O/P

PC6204 O/P

(4)(4)

(4)

PC6820 ACCESSPC6820 ACCESS

PC6820 ACCESS

(5)(5)

(5)

Reporting Codes for the restoral of module tampers.

There are 16 keypad tamper restoral reporting codes, one for each keypad that can be enrolled onto

the system.

This is the PC6400 tamper restoral reporting code.

There are 30 reporting codes for tamper restorals on PC6108 zone expansion modules. The maximum

number of expansion modules you will use is 30.

There are 9 tamper restoral reporting codes, one for each PC6216 module that can be enrolled onto the

system.

There are 16 module tamper restoral reporting codes, one for each PC6204 module that can be enrolled

onto the system.

There are 16 module tamper alarm restoral reporting codes sections, one for each PC6820 Access Control

module that can be enrolled on the system.

This is the PC6442 tamper restoral reporting code.

This is the PC6443 tamper restoral reporting code.

Reporting Codes for Closings.

Reporting codes for users 0001-0128. See “Miscellaneous Closings” for additional users.

Miscellaneous Reporting Codes for Closings.

Closing 129 - 1000 - This reporting code will be sent when any user code from 0129-1000 is used to

arm an area. In order to identify the user which armed the area the panel will first perform a “User

Log” for the user that armed the area and then log/transmit the Closing 129-1000 reporting code.

If an area auto-arms, and some zones were open, the system will force arm the open zones. The

system will send the partial closing reporting code to the central station, along with the alarm

reporting codes of the zones that are open. The partial closing reporting code will also be transmitted

if zones were manually bypassed.

If automatic arming is cancelled, this reporting code will be sent.

When the system auto-arms, the panel will send the auto-arm reporting code to the central station.

The system sends this reporting code when area(s) are closed by the APS software.

The system sends this reporting code when area(s) are closed by the ODS software.

CLOSINGSCLOSINGS

CLOSINGS

(06)(06)

(06)

USERS 1-128USERS 1-128

USERS 1-128

MISC CLOSINGSMISC CLOSINGS

MISC CLOSINGS

(07)(07)

(07)

CLOSING 129-1000CLOSING 129-1000

CLOSING 129-1000

PARTIAL CLOSINGPARTIAL CLOSING

PARTIAL CLOSING

AUTOARM ABORTAUTOARM ABORT

AUTOARM ABORT

AUTOARM CLOSINGAUTOARM CLOSING

AUTOARM CLOSING

6442 APS CLOSING6442 APS CLOSING

6442 APS CLOSING

MOD TAMP RESTOREMOD TAMP RESTORE

MOD TAMP RESTORE

(05)(05)

(05)

PC6501 KEYPADSPC6501 KEYPADS

PC6501 KEYPADS

(0)(0)

(0)

PC6400 RS-232PC6400 RS-232

PC6400 RS-232

(1)(1)

(1)

PC6442 APUPC6442 APU

PC6442 APU

(6)(6)

(6)

PC6443 ODSPC6443 ODS

PC6443 ODS

(7)(7)

(7)

6443 ODS CLOSING6443 ODS CLOSING

6443 ODS CLOSING

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Comentarios a estos manuales

Sin comentarios

DSC PC6010 Manual de instalación Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DSC PC6010